Общение > Прошивки
прошивка ML2168W
(1/1)
wudi:
обновил прошивку с сайта производителя. теперь принтер не печатает. мигает лампочка WPS и горит оранжевым лампочка картриджа
SN: Z7Q1BKBC200107X
CRUM: 95800868
отчет на печать тоже не выводит
версию прошивки пишет V3.00.01.99
нужен дамп прошивки, попробую залить через программатор по этому способу You are not allowed to view links.
Register or Login
Sana956:
You are not allowed to view links.
Register or Login
wudi:
You are not allowed to view links.
Register or LoginYou are not allowed to view links.
Register or Login
--- Конец цитаты ---
лог терминала. я правильно понял что из под терминала его уже не прошить? только на spi 25 программаторе?
(click to show/hide)firmware source address : 0x41800000
firmware address to be written nn: 0x22222221
firmware size : 0x01111111
main : 0x22220022
sub : 0x11111119
image : 0x02602202
image reserved : 0x10011011
Can not find sig
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...nnnnnnnnnnnnn
Loading Kernel...
New kernel was found...
checksum is valid
Run Kernel..
FW Upgrade JUMP : 40974E00
RootWriteMonitorProgram : 400220D8
------------------------------------------------------------------------------
BackUp Debugging Message
------------------------------------------------------------------------------
Task Name: PJLT , Exception Type: Assert
------------------------------------------------------------------------------
Assertion failed:
file ..\..\..\..\Platform\App\MM\MM_Lib.c, line 2094
------------------------------------------------------------------------------
Call Stack
------------------------------------------------------------------------------
404FC5FC
404FEBE8
404F0968
404FEB28
4015EA7C
40104E6C
4015D48C
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
FFFFFFFF
------------------------------------------------------------------------------
ramsize= 41125FFF, gsbsize = 40F42058, FreeMemPtr = 40F4139C, FreeMemStart = 40F4139C
BOOT Debug is always Enabled!!
----------- ARM Control Coprocessor ------------
Control register = 0x 510ff
MMU : ON
Icahe : ON
Dcahe : ON
----------------------------------------------
Installed Memory = 32MB
<<< Debug Mode >>>
<<<LogMsg_PrintOn>>>
Memory Size Bank #0 , Size : 33554432
########################################################
Total installed Memory Size is 0x02000000 [32.000 MB]
Total installed Memory Size is 0x02000000 [32 MB]
########################################################
=========== Display MCT =============
[SegID] [Seg Size] [Seg Addr]
$FIL 0x 80000 0x41126200
$MCT 0x 200 0x41126000
$UEV 0x 20000 0x411a6200
$CJL 0x c00 0x411c6200
$CTS 0x 80000 0x411c6e00
$PCN 0x 600 0x41246e00
$ENG 0x c00 0x41247400
=====================================
<Winbond W25Q64>
[*pulManufacturerID][000000EF]
[*pulManufacturerID][00000040]
[*pulManufacturerID][00000017]
[Size][0x00800000]
SrcAdd = 41ff8a00, DestAddr = 411bec00
0x47 0x56 0x33 0x58 0x00 0x00 0x00 0x04 0xa6 0x34 0x01 0xc4 0x00 0x01 0x00 0x04
0x00 0x00 0x19 0xdc 0x00 0x05 0x00 0x10 0x5a 0x37 0x51 0x31 0x42 0x4b 0x42 0x43
0x32 0x30 0x30 0x31 0x30 0x37 0x58 0x00 0x00 0x06 0x00 0x80 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
BB Item Count new = 452, old =452
!! UEV Used Size = 8120
BB_ReadOnlyDataCheckSum OK!!
BB_GetBBReadOnlyData ID = 5, Size = 16, DataPtr = 5A 37 51 31 42 4B 42 43 32 30 30 31 30 37 58 00
BB_GetBBReadOnlyData ID = 8, Size = 4, DataPtr = 00 00 00 33
BB_GetBBReadOnlyData ID = 9, Size = 4, DataPtr = 00 00 00 00
BB_UpdateReadOnlyBBData OK!!
Not Support FM
[LogMsg_Config] NV value(0x0)
LogMsg Error
LogMsg_PrintOff
<<<LogMsg_EngPrintOff>>>
Skip DSAI...
CTS Size = 7664 : Bluejay_W EP V2.5
CTS Size = 3300 : Bluejay_W FUSER V0.14
CTS Size = 1092 : BlueJayW PRINT v5.0
CTS Size = 28984 : Bluejay_W TR V2.5
Platform Initialized ......
Model Code : ML2165W
Main Kernel F/W Version : V3.00.01.99
Main Kernel F/W Date : Mar-01-2014
Basic Board
Model ID : ML2165W
Country Code = 1a
[IDS] Total Segment Size = 200176 Bytes
<<<HAL_InitWDT>>> WatchDog Initialized !!!
Check PowerOn Mode PBA Port 0 ---- ( GPIO_Ctrl - 0xffffffff GPIO_Dir - 0xfffffffb GPIO_In - 0x1f7fa )
Check PowerOn Mode PBA Port 1 ---- ( GPIO2_Ctrl - 0x1d3f GPIO2_Dir - 0xffffead3 GPIO2_In - 0xfe0f )
################### Normal Mode Start##########################
[SM] SM_ChangeCountry C(51) MC(51), BC(51), BMC(51), SC(1), SBC(1)
[JMDB] Memory Clear Mode [1]
[JMDB] Memory Clearing Stage... [ 0%]
BB_CheckTotalBroken() = FALSE
[JMDB] Memory Clearing Stage... [100%]
BB_CheckTotalBroken() = FALSE
AccountSS Memory Clear Mode [1]
BB_CheckTotalBroken() = FALSE
AccountSS Memory Clearing Completed
[BB] Reset BB Mark
[APO] PSM_StopAPOTime
[APO] BB_CON_APO_ENABLE: 0
[APO] BB_CON_APO_TIME: 120 Mins, 3600000 2ms Ticks
[APO] PSM_APO_Initialize: Enable[0][120 Mins][3600000 2ms Ticks]
[JQ] Initialize--------------------?????
[JQ] JQ_EnvInitialize BB_JM_JOB_ID(738) fResult(1)
[JQ_Initialize]---initialized---
<<<<< Installed FJM Resource Count = 4 >>>>>
HNDL [StringID] M O C G S C V D S
00 - - - - - - - - -
01 PrintNormal O O O O O - O - O
02 ReportEmul O O O O O O O O O
03 DirectPrint O O O O - - - - -
04 FilePrint O O O O - - - - -
Create JMUT Task
[UIAdmin]PRD_ITEM_WLAN_MODULE: Get PRD data failed
[UIBE] OPE Button Driver is created
[UIBE] Register Handle (1)
[UIBE] Register Handle (2)
[UIBE] Register Handle (3)
USB_Config_GetVendorID[4e8][4]
[UIDS] UIDS_DeviceStatusWatch DSAI_ID(0x00ff0152), OV(0x00000000), NV(0xffffffff)
[UILED] UILED_mainTask : All LED Off
[UILED] Kind(5), Blink(1), Color(4)
[UILED] Kind(7), Blink(1), Color(5)
[UILED] Kind(6), Blink(1), Colo
<<<suspend_intr>>> : ErlySus
<<<suspend_intr>>> : Suspendr(4)
[UILED] Kind(0), Blink(1), Color(3)
[UILED] Kind(0), Blink(3), Color(1)
[SPI_SFR_CTRL0 = 0x34000000]
[SPI_SFR_SCKCYC = 0x00030003]
[WLAN] FW : 802.11n
[WLAN] NVRAM : SEC
<<<suspend_intr>>> : Reset
<<<suspend_intr>>> : EnumDone
USBTrdTim : Bus Clock [100000000], TrdTim[3]
<<<suspend_intr>>> : ErlySus
<<<suspend_intr>>> : Reset
<<<suspend_intr>>> : EnumDone
USBTrdTim : Bus Clock [100000000], TrdTim[3]
=====Initializing MAC Driver =====
<<<ConMAA_RegisterItems>>>
Add [USB_DeviceID]
BB_CheckTotalBroken() = FALSE
BB_CheckTotalBroken() = FALSE
[ConSSAdmin] ConAdmin_EcoPrnSetMode (Req=0x0)(UI Mode=1)
[ImTMAA_RegisterItems] Started...
[ImTMAA_RegisterItems] Register <Jig Decoder Function>.
[RptMAA] MAA Symbol Registered
[MAA] Register Parser Entry to ConSS [ PBATest ] PBATest_CompEntry
===========================================
Subsystem Initialization Time
===========================================
JMSS Init-OK(38msec)
UISS Init-OK(18msec)
SCNSS is not installed
IMTSS Init-OK(8msec)
PRNSS is not installed
RIPSS is not installed
FAXSS is not installed
PHNSS is not installed
CONSS Init-OK(3554msec)
RPTSS Init-OK(4msec)
MSCSS is452440
452440
talled
TESTSS Init-OK(4msec)
AAASS Init-OK(0msec)
REGSS is not installed
DIAGSS is not installed
-------------------------------------------
# Platform - 0msec
# System Total(Root~SubsysEnd)- 3796msec
-------------------------------------------
==================================================================================================
Display MST
[SegID] [Handle] [SegSize] [BlockSize] [TotBNO] [TAllocBNO] [TFreeBNO] [TLargeBNO] [VM] [Start]
$ONS 8 0x00200000 64 32768 26441 6327 6281 0 0x41248000
$IPC 9 0x00001000 64 64 0 64 64 0 0x41448000
$ATM 10 0x00001900 64 100 2 98 98 1 0x41449000
$BBD 11 0x00001C40 1 7232 7232 0 0 0 0x4144A900
$BBR 12 0x00005000 1 20480 20480 0 0 0 0x4144C540
$BOL 13 0x00000740 64 29 0 29 29 0 0x41451540
$BNL 14 0x00000740 64 29 0 29 29 0 0x41451CC0
$JQQ 15 0x0000A1C0 64 647 0 647 647 1 0x41
$JMP 16 0x00032000 64 3200 0 3200 3200 0 0x4145C600
$UCH 17 0x00001000 64 64 0 64 64 0 0x4148E600
$UJS 18 0x00019000 64 1600 0 1600 1600 0 0x4148F600
$UDS 19 0x00001000 64 64 0 64 64 0 0x414A8600
$ULE 20 0x00019000 64 1600 0 1600 1600 0 0x414A9600
$CAS 21 0x00040000 64 4096 30 4066 4066 0 0x414C2600
$CNS 22 0x00200000 64 32768 7116 25652 25652 0 0x41502600
$PJL 23 0x00000AF4 1 2804 2780 24 24 0 0x41702600
$IDS 24 0x00030DF0 1 200176 200112 64 64 0 0x417030F4
$CMP 25 0x0000FFC0 64 1023 0 1023 1023 0 0x41733F00
$IMT 26 0x00040FC0 64 4159 0 4159 4159 0 0x41743F00
$RPT 27 0x0000EFC0 64 959 0 959 959 0 0x41784F00
$HPS 69 0x0084A5C0 64 135831 0 135831 135831 0 0x417B5A40
==================================================================================================
=========================================
Check remained memory in region #0 (0x1126000)
rnid : 0x0
Remained RN#0 region : 0xb8c00 - 756736
=========================================
[UIDS] UIDS_DeviceStatusWatch DSAI_ID(0x00ff0163), OV(0x80ff0000), NV(0x80ff0001)
[UIDS] DSAI ID (0x00ff0163), Attribute(0)
[UIDS] APS(1)
[UIDS] UIDS_SetWirelessStatus-->(0xffffffff)/(0xff0157)
[UIDS] UIDS_SetWPSMode-->(0xffffffff)/(0xff0156)
[UILED] Kind(3), Blink(1), Color(1)
[UILED] Kind(5), Blink(1), Color(4)
[UILED] Kind(7), Blink(1), Color(5)
[UILED] Kind(6), Blink(1), Color(4)
[UILED] Kind(0), Blink(4), Color(1)
[UILED] Kind(7), Blink(4), Color(5)
[UILED] Kind(5), Blink(4), Color(4)
[UILED] Kind(6), Blink(4), Color(4)
===================================================
| FW Version : V3.00.01.99 Mar-01-2014 |
===================================================
JQ Recovery Time RJL : 0 ms
JQ Recovery Time Release SJL : 4 ms
JQ Recovery Time Release DJL : 0 ms
JQ Recovery Time Garbage File Delete : 0 ms
JQ Total Recover Time : 16 ms[WLANDRV] started WLANDRV_V1.05.00
======NICCON Init Finish!!=========
====== Network Ready ======
BCM Firmware Version : wl0: Nov 26 2009 03:43:38 version 4.218.179.0
WLAN_BCM_GetVndr : 00:15:99:b8:51:18
dhd_cdc.c,310: dongle_error cmd 263,len 12, (-23) [Unsupported][ERROR][WLAN_BCM_main.c][1884] (WLAN_BCM_ioctl) return is error(ffffffe9), cmd=263
1 2 3 4 5 6 7 8 9 10 11 12 13
RJI: Wait msg qMT1900 Task Mode is 1
<<<IDS_IF_GetMarginRange>>> ERROR... Check Interface Function of ([PrnSpec]GetMarginRange)
<<<IDS_MakeCommonMarginXML>>> L(26281) ERROR... Return Value of IDS_IF_GetMarginRange()
<<<IDS_IF_GetMarginRange>>> ERROR... Check Interface Function of ([PrnSpec]GetMarginRange)
<<<IDS_MakeCommonMarginXML>>> LWLAN_BCM_P2P_Initialize 158
(26326) ERROR... Return Value of IDS_IF_GetMarginRange()
[IDS] Number Of Available Nodes (130/500)DISCONNECTED -> CONNECTING
CONNECTING -> CONNECTED
======WSD Init Finish!!=========
[PSM] Mode Refresh - 1
wudi:
прошил я данный принтер. проблема была в адаптере для терминала и терминальной программе. по You are not allowed to view links.
Register or Login этому споcобу все получилось. прошивка v3.00.01.15. все работает
Навигация
Перейти к полной версии