всё сделал как написано но при прошивке оргиналной прошивкой принтер зависает в довлоад моде вот дебаг
===============================
Start flash_writer
===============================
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG : $IMG
Can not find sig
----------- Display Dcache Status ------------
Control register = 0x000510F8
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x42000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<HS><HS><EPB_RX 0x00000100>
Image includes PJL(0000001B) -> Waste 48 bytes
[[7340104 Bytes received]] - Complete Downloading
} /* Download End */
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
model : 0x0300002F
flash type : 0x00010001
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG
FlashCheckSum
{
check sum start address : 42000018, count : 00700000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
ul_rom_size[0x42700018]
Found new kernel(0x424F0018)!!!!
ZIP Dest : 0x40D80000
[[[FFFFFFFF]]], [[[000F69A3]]]
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
New kernel was found...
CHKSUM
{
check sum start address : 004F0000, count : 00101000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Find Compressed Kernel
Kernel UnZip Done!!
JUMP address = 0x40D80000
jump to 0x40D80000NEW MAC
Begin MAA_Test Approval
NEW MAC
gIsIPv4PacketAccepted : 00000001
gIsIPv6PacketAccepted : 00000001
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
New kernel was found...
CHKSUM
{
check sum start address : 004F0000, count : 00101000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Find Compressed Kernel
Kernel UnZip Done!!
JUMP address = 0x40D80000
jump to 0x40D80000NEW MAC
Begin MAA_Test Approval
NEW MAC
gIsIPv4PacketAccepted : 00000001
gIsIPv6PacketAccepted : 00000001
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
New kernel was found...
CHKSUM
{
check sum start address : 004F0000, count : 00101000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Find Compressed Kernel
Kernel UnZip Done!!
JUMP address = 0x40D80000
jump to 0x40D80000NEW MAC
Begin MAA_Test Approval
NEW MAC
gIsIPv4PacketAccepted : 00000001
gIsIPv6PacketAccepted : 00000001
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
<CPU:360Mhz RAM:166Mhz SysClk:120Mhz DDR2>
----------------------------------------------------------------
START-UP MODE : Monitor Program
Boot into pROBE+ like stand-alone mode
[Type 'help' to see command info.]
Version : Ver.0.30 (SANDPIPER) 2010-08-15
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+> fl
Upgrade Flash ROM Image
==> Now program restarted on the RAM to program flash ROM(0x40020000)
jump to 0x40020000
Flash Data Download Address : 0x42000000
===============================
Start flash_writer
===============================
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG : $IMG
Can not find sig
----------- Display Dcache Status ------------
Control register = 0x000510F8
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x42000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<HS><HS>
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
<CPU:360Mhz RAM:166Mhz SysClk:120Mhz DDR2>
----------------------------------------------------------------
START-UP MODE : Monitor Program
Boot into pROBE+ like stand-alone mode
[Type 'help' to see command info.]
Version : Ver.0.30 (SANDPIPER) 2010-08-15
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+>
----------------------------------------------------------------
Do you want to download from external port?[N] : y
Enter Start Address[0x40D80000] : 0x40d80000
Ready to download from Parallel/Usb/Serial (0x40D80000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<FS><HS><HS><EPB_RX 0x00000200>
Special Image is downloading(font, etc)...
-> Address is 0x40D80000
[[2732076 Bytes received]] - Complete Downloading
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+> 40d80000
invalid command format
pROBE+> go 40d80000
Executing the code at 0x40D80000
NEW MAC
------------------------------------------------------------------------------
Data Access Abort
Running: 'ROOT' -#00020000
------------------------------------------------------------------------------
CPSR = 80000013 (Nzcv if ARM SVC) SP =4157DD0C LR =40E9437C
R0 =CF69FF10 R1 =CF02FF05 R2 =00000004 R3 =4157DD18 R4 =4157DD44
R5 =00000001 R6 =00670007 R7 =4157DD14 R8 =41111A68 R9 =411D42D8
R10=00000000 R11=00000000 R12=00000000
PC =40E9433C
------------------------------------------------------------------------------
'ROOT' task - #00020000
task status(2) - 0x00000000
- Ready
task highest stack addr - 0x4157DE00
task current stack addr - 0x4157DD10
task lowest stack addr - 0x4157BA00
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Call Stack : SP=0x4101C99C (Stack End=0x4157DE00)
----------------------------------------------------------------------
[KERNEL] Code Start Addr = 0x40D80000, Code End Addr = 0x40FBCF4C
[NETWORK] Code Start Addr = 0x00000000, Code End Addr = 0x00000000
4101C9B0 = 40EE3218
4101C9B4 = 40EE3848
4101C9C8 = 40DA2E2C
4101C9D0 = 40EE3384
4101C9D8 = 40EE3384
4101CA24 = 40E9437C
4101CA28 = 40E9433C
[ WATCH DOG RESET Booting... ]
Press any key to execute Monitor Program within 1 sec...
New kernel was found...
CHKSUM
{
check sum start address : 004F0000, count : 00101000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Find Compressed Kernel
Kernel UnZip Done!!
JUMP address = 0x40D80000
jump to 0x40D80000NEW MAC
Begin MAA_Test Approval
NEW MAC
gIsIPv4PacketAccepted : 00000001
gIsIPv6PacketAccepted : 00000001
[PJL]Write Rom Process!!(Count=7340056)
[PJL:FWUpgrade] 0x42000000 out 0x438FF740(7340056) ~ 0x43FFF758
[PJL:FWUpgrade] 0x24494D47 , a S<
All Preparation is Done...
Now JUMP to Flash Write Procedure.!!!!!!!!
Flash Data Download Address : 0x42000000
===============================
Start flash_writer
===============================
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
model : 0x0300002F
flash type : 0x00010001
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG
FlashCheckSum
{
check sum start address : 42000018, count : 00700000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
ul_rom_size[0x42700018]
Found new kernel(0x424F0018)!!!!
ZIP Dest : 0x40D80000
[[[FFFFFFFF]]], [[[000F69A5]]]
----------- Display Dcache Status ------------
Control register = 0x000510FA
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x42000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<HS><HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 48 bytes
Image includes PJL(0000001B) -> Waste 48 bytes
} /* Download End */
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
model : 0x0300002F
flash type : 0x00010001
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG
FlashCheckSum
{
check sum start address : 42000018, count : 00700000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
ul_rom_size[0x42700018]
Found new kernel(0x424F0018)!!!!
ZIP Dest : 0x40D80000
[[[FFFFFFFF]]], [[[000F69A5]]]
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
<CPU:360Mhz RAM:166Mhz SysClk:120Mhz DDR2>
----------------------------------------------------------------
START-UP MODE : Monitor Program
Boot into pROBE+ like stand-alone mode
[Type 'help' to see command info.]
Version : Ver.0.30 (SANDPIPER) 2010-08-15
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+>
----------------------------------------------------------------
Do you want to download from external port?[N] : y
Enter Start Address[0x40D80000] : 0x40d80000
Ready to download from Parallel/Usb/Serial (0x40D80000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<FS><HS><HS><EPB_RX 0x00000200>
Special Image is downloading(font, etc)...
-> Address is 0x40D80000
[[2732076 Bytes received]] - Complete Downloading
----------------------------------------------------------------
Do you want to download from external port?[N] : d
pROBE+>
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
<CPU:360Mhz RAM:166Mhz SysClk:120Mhz DDR2>
----------------------------------------------------------------
START-UP MODE : Monitor Program
Boot into pROBE+ like stand-alone mode
[Type 'help' to see command info.]
Version : Ver.0.30 (SANDPIPER) 2010-08-15
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+>
----------------------------------------------------------------
Do you want to download from external port?[N] : y
Enter Start Address[0x40D80000] : 0x40d80000
Ready to download from Parallel/Usb/Serial (0x40D80000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<FS><HS><HS><EPB_RX 0x00000200>
Special Image is downloading(font, etc)...
-> Address is 0x40D80000
[[2732076 Bytes received]] - Complete Downloading
----------------------------------------------------------------
Do you want to download from external port?[N] : n
pROBE+> go 40d80000
Executing the code at 0x40D80000
NEW MAC
------------------------------------------------------------------------------
Data Access Abort
Running: 'ROOT' -#00020000
------------------------------------------------------------------------------
CPSR = 80000013 (Nzcv if ARM SVC) SP =4157DD0C LR =40E9437C
R0 =CF69FF10 R1 =CF02FF05 R2 =00000004 R3 =4157DD18 R4 =4157DD44
R5 =00000001 R6 =00670007 R7 =4157DD14 R8 =41111A68 R9 =411D42D8
R10=00000000 R11=00000000 R12=00000000
PC =40E9433C
------------------------------------------------------------------------------
'ROOT' task - #00020000
task status(2) - 0x00000000
- Ready
task highest stack addr - 0x4157DE00
task current stack addr - 0x4157DD10
task lowest stack addr - 0x4157BA00
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Call Stack : SP=0x4101C99C (Stack End=0x4157DE00)
------------------------------------------------------------------------------
[KERNEL] Code Start Addr = 0x40D80000, Code End Addr = 0x40FBCF4C
[NETWORK] Code Start Addr = 0x00000000, Code End Addr = 0x00000000
4101C9B0 = 40EE3218
4101C9B4 = 40EE3848
4101C9C8 = 40DA2E2C
4101C9D0 = 40EE3384
4101C9D8 = 40EE3384
4101CA24 = 40E9437C
4101CA28 = 40E9433C
[ WATCH DOG RESET Booting... ]
Press any key to execute Monitor Program within 1 sec...
New kernel was found...
CHKSUM
{
check sum start address : 004F0000, count : 00101000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Find Compressed Kernel
Kernel UnZip Done!!
JUMP address = 0x40D80000
jump to 0x40D80000NEW MAC
Begin MAA_Test Approval
NEW MAC
gIsIPv4PacketAccepted : 00000001
gIsIPv6PacketAccepted : 00000001
[PJL]Write Rom Process!!(Count=7340056)
[PJL:FWUpgrade] 0x42000000 out 0x438FF740(7340056) ~ 0x43FFF758
[PJL:FWUpgrade] 0x24494D47 , a S<
All Preparation is Done...
Now JUMP to Flash Write Procedure.!!!!!!!!
Flash Data Download Address : 0x42000000
===============================
Start flash_writer
===============================
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
model : 0x0300002F
flash type : 0x00010001
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG
FlashCheckSum
{
check sum start address : 42000018, count : 00700000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
ul_rom_size[0x42700018]
Found new kernel(0x424F0018)!!!!
ZIP Dest : 0x40D80000
[[[FFFFFFFF]]], [[[000F69A5]]]
----------- Display Dcache Status ------------
Control register = 0x000510FA
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x42000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<HS><HS><EPB_RX 0x00000100>
Image includes PJL(0000001B) -> Waste 48 bytes
Image includes PJL(0000001B) -> Waste 48 bytes
} /* Download End */
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
model : 0x0300002F
flash type : 0x00010001
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG
FlashCheckSum
{
check sum start address : 42000018, count : 00700000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
ul_rom_size[0x42700018]
Found new kernel(0x424F0018)!!!!
ZIP Dest : 0x40D80000
[[[FFFFFFFF]]], [[[000F69A5]]]
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
