какую электронку давал на ту и отослал
вот . попробовал с новой прошивкой
[ POWER ON Booting... ]
Pressed key...
Run Firmware Upgrade Mode...
Flash Data Download Address : 0x40400000
===============================
Start flash_writer
===============================
firmware source address : 0x40400018
firmware address to be written : 0x00000000
firmware size : 0x00000000
<<<0x00000000>>>
<<<0x00000000>>>
Can not find sig
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x40400000)
-------------------------
Link ID : [4F54281A]
-------------------------
USB download<HS><HS><EPB_RX 0x00000100>
Image iocludes PJL(0000001B) -> Waste 80 byves
[[512104 Bytes received]] - Complete Downloading
} /* Download Enf */
firmware source addsess : 0x40400018
firmware addsess to be written : 0x00000000
firoware size : 0x0007D000
<<<0x00000000>>>
<<<0x00000000>>>
checksum is valid
Found new kernel(0x40415018)!!!!
[ZLIB ERROR]The compressed data are corrupted or incomplete!!!
This is NOT walid image.!!!!
Not fouod new kernel!!!!
Downloaded Image is not Valid
Seset Target and Run Flash Writing Program Again
