Samsung ML-3710D

[Viruss]

Доброго времени суток. В общем проблема такая, принесли аппарат Samsung ML-3710D. Прошили его непонятно чем, в результате аппарат определяется системой как CLP-310. На дисплее Wait Image. При попытке залить в него оригинальную ML3710D_V2.00.01.35.hd выдает следующее:

(click to show/hide)

Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 80 bytes
[[15990888 Bytes received]] - Complete Downloading

} /* Download End */

Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00F40000
 Model      : 0x03000043
 Flash Type : 0x00020002
 Image Type : 0x00000000
temp_buf : $IMG
SIG : $IMG

FlashCheckSum

check sum start address : 02000018, count : 00F40000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
 Decompress ....................................................................
....................................... Done
 Decompress ...............................................................
[ZLIB ERROR]The compressed data are corrupted or incomplete!!!

Compression of current image is crashed!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again

Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : B0.22 11-11-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
vxshell> nnnnnn
Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : B0.22 11-11-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
vxshell> fl

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <MXIC MX25L128>
Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00000000
 Model      : 0x00000000
 Flash Type : 0x00000000
 Image Type : 0x00000000
temp_buf :
SIG : $IMG

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : B0.22 11-11-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
vxshell> fl

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <MXIC MX25L128>
Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00000000
 Model      : 0x00000000
 Flash Type : 0x00000000
 Image Type : 0x00000000
temp_buf :
SIG : $IMG

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 80 bytes
[[15990888 Bytes received]] - Complete Downloading

} /* Download End */

Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00F40000
 Model      : 0x03000043
 Flash Type : 0x00020002
 Image Type : 0x00000000
temp_buf : $IMG
SIG : $IMG

FlashCheckSum

check sum start address : 02000018, count : 00F40000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
 Decompress ....................................................................
..................................... Done
 Decompress ...............................................................
[ZLIB ERROR]The compressed data are corrupted or incomplete!!!

Compression of current image is crashed!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again?
Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : B0.22 11-11-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
vxshell> pm.l 12d44 e3a00001
*0x00012D44 = 0xE3A00001

vxshell> fl

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <MXIC MX25L128>
Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00000000
 Model      : 0x00000000
 Flash Type : 0x00000000
 Image Type : 0x00000000
temp_buf :
SIG :

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 80 bytes
[[15990888 Bytes received]] - Complete Downloading

} /* Download End */

Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00F40000
 Model      : 0x03000043
 Flash Type : 0x00020002
 Image Type : 0x00000000
temp_buf : $IMG
SIG :

FlashCheckSum

check sum start address : 02000018, count : 00F40000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
 Decompress ....................................................................
....................................... Done
 Decompress ...............................................................
[ZLIB ERROR]The compressed data are corrupted or incomplete!!!

Compression of current image is crashed!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End

FlashCheckSum

check sum start address : 02000000, count : 00400000
check sum : 0000EA6B
} /* Checksum End

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <MXIC MX25L128>
Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00100000
i_header->ul_count       : 0x003FFFF4
 Model      : 0x27DDC4BA
 Flash Type : 0xC5184281
 Image Type : 0x411A4F13
temp_buf : $NKF
SIG : $IMG

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>?
Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : B0.22 11-11-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
vxshell> fl

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <MXIC MX25L128>
Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00000000
 Model      : 0x00000000
 Flash Type : 0x00000000
 Image Type : 0x00000000
temp_buf :
SIG : $IMG

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 80 bytes
[[15990888 Bytes received]] - Complete Downloading

} /* Download End */

Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00F40000
 Model      : 0x03000043
 Flash Type : 0x00020002
 Image Type : 0x00000000
temp_buf : $IMG
SIG : $IMG

FlashCheckSum

check sum start address : 02000018, count : 00F40000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
 Decompress ....................................................................
................................... Done
This is not a valid image.!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : B0.22 11-11-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
vxshell> fl

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <MXIC MX25L128>
Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00000000
 Model      : 0x00000000
 Flash Type : 0x00000000
 Image Type : 0x00000000
temp_buf :
SIG : $IMG

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 80 bytes
[[15990888 Bytes received]] - Complete Downloading

} /* Download End */

Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00F40000
 Model      : 0x03000043
 Flash Type : 0x00020002
 Image Type : 0x00000000
temp_buf : $IMG
SIG : $IMG

FlashCheckSum

check sum start address : 02000018, count : 00F40000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
 Decompress ....................................................................
....................................... Done
 Decompress ...............................................................
[ZLIB ERROR]The compressed data are corrupted or incomplete!!!

Compression of current image is crashed!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
?
Loading boot application...
[OK]

 Boot : B0.22 11-11-2011
 DRAM : 64 MB

 <MXIC MX25L128>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : B0.22 11-11-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
vxshell> fl

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <MXIC MX25L128>
Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00000000
 Model      : 0x00000000
 Flash Type : 0x00000000
 Image Type : 0x00000000
temp_buf :
SIG : $IMG

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x02000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 80 bytes
[[15990888 Bytes received]] - Complete Downloading

} /* Download End */

Verify Image             : 0x02000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00F40000
 Model      : 0x03000043
 Flash Type : 0x00020002
 Image Type : 0x00000000
temp_buf : $IMG
SIG : $IMG

FlashCheckSum

check sum start address : 02000018, count : 00F40000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
 Decompress ....................................................................
....................................... Done
 Decompress ...............................................................
[ZLIB ERROR]The compressed data are corrupted or incomplete!!!

Compression of current image is crashed!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again

Сильно не пинайте, я новичок в этом деле =)

[Aleksey Mo-skin]

Стучи в аську 434748003 - решим вопрос.

[Aleksey Mo-skin]

Делаем так:
1. Входим в дебаг
2. Нажимаем Ctrl+C

Do you want to download from external port?[N] :

Нажимаем Y

Enter Start Address[0x00100000] : 0x

Нажимаем Enter

3. Перетаскиваем файл Kernel_NVI_ML3710D_V2.00.01.35.hd   ( You are not allowed to view links. Register or Login ) на usbprns2.exe

Снова спросит:

Do you want to download from external port?[N] :

Нажимаем N

4. Вводим команду go 00100000 и нажимаем Enter

Принтер должен включиться в обычном режиме, но это еще не все

5. Прошиваем оригинальной прошивкой ML3710D_V2.00.01.35.hd

После прошивки принтер должен перезагрузиться и включиться как обычно.

[Viruss]

Спасибо! Всё получилось! Круто! 

[kiborgovskii]

Сегодня был трабл как у топикстартера. Поднял по методе Алексея. Все работает.