[ POWER ON Booting... ]
Pressed key...
Upgrade Flash ROM Image
==> Now program restarted on the RAM to program flash ROM(0x40020000)
jump to 0x40020000
Flash Data Download Address : 0x42000000
===============================
Start flash_writer
===============================
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG : $IMG
Can not find sig
----------- Display Dcache Status ------------
Control register = 0x000510F8
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x42000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54240A]
-------------------------
Drv "design ware core" USB download<HS><HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 48 bytes
[[7340104 Bytes received]] - Complete Downloading
} /* Download End */
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
model : 0x0300002F
flash type : 0x00010001
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG
FlashCheckSum
{
check sum start address : 42000018, count : 00700000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
ul_rom_size[0x42700018]
Found new kernel(0x424F0018)!!!!
ZIP Dest : 0x40D80000
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
New kernel was not found...
