Общение > Прошивки
SCX3400 можно ли понизить версию прошивки через дебаг?
Aleksey Mo-skin:
Вы шьете в обычном режиме, и непонятно зачем fl пририсовали.
При включении надо удерживать клавишу N, чтобы войти в режим vxshell, и только после этого вводить команду fl!
NoEndOutcry:
Я удерживаю и fl набираю и ентер жму. Может не получилась перемычка? Попробую еще раз пропаять.
Aleksey Mo-skin:
Вот пример прошивки SCX-3400 через дебаг:
(click to show/hide)Loading boot application...
[NG0x00000AF3]
Boot : Egmont(C3N) V0.12 08-01-2011
<Winbond W25Q64>
Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry
----------------------------------------------------------------
START-UP MODE : Monitor Program
[Type 'help' to see command info.]
Version : Egmont(C3N) V0.12 08-01-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
No
vxshell> nn
invalid command format
vxshell> fl
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
<Winbond W25Q64>
Verify Image : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
Model : 0x00000000
Flash Type : 0x00000000
Image Type : 0x00000000
temp_buf :
SIG : $IMG
Can not find signature
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x01900000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 92 bytes
[[4194424 Bytes received]] - Complete Downloading
} /* Download End */
Verify Image : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000
Model : 0x05000063
Flash Type : 0x00130002
Image Type : 0x00000000
temp_buf : $KER
SIG : $IMG
FlashCheckSum
check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Boot image!
Found new kernel(0x0194001C)!!!!
Decompress .......................................................................... Done
Decompress .......................................................................... Done
cur : 0x50331928, new : 0x50331928
This is a valid image.!!!!
Encryption Kernel check OK
[[[[[ Flash Writing : BASE : 0x00000000]]]]]
SPI No. from - to ( 0 - 0)
flash_start_addr : 0x00000000
flash_end_addr : 0x00400000
flash_data_size : 0x00400000
src_image_start_addr : 0x0190001C
[SFLASH_Erase] 00000000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(2 percent : 0x003F0000)
[SFLASH_Erase] 00010000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(4 percent : 0x003E0000)
[SFLASH_Erase] 00020000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(5 percent : 0x003D0000)
[SFLASH_Erase] 00030000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(7 percent : 0x003C0000)
[SFLASH_Erase] 00040000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(8 percent : 0x003B0000)
[SFLASH_Erase] 00050000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(10 percent : 0x003A0000)
[SFLASH_Erase] 00060000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(11 percent : 0x00390000)
[SFLASH_Erase] 00070000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(13 percent : 0x00380000)
[SFLASH_Erase] 00080000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(15 percent : 0x00370000)
[SFLASH_Erase] 00090000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(16 percent : 0x00360000)
[SFLASH_Erase] 000A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(18 percent : 0x00350000)
[SFLASH_Erase] 000B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(19 percent : 0x00340000)
[SFLASH_Erase] 000C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(21 percent : 0x00330000)
[SFLASH_Erase] 000D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(22 percent : 0x00320000)
[SFLASH_Erase] 000E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(24 percent : 0x00310000)
[SFLASH_Erase] 000F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(25 percent : 0x00300000)
[SFLASH_Erase] 00100000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(27 percent : 0x002F0000)
[SFLASH_Erase] 00110000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(29 percent : 0x002E0000)
[SFLASH_Erase] 00120000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(30 percent : 0x002D0000)
[SFLASH_Erase] 00130000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(32 percent : 0x002C0000)
[SFLASH_Erase] 00140000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(33 percent : 0x002B0000)
[SFLASH_Erase] 00150000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(35 percent : 0x002A0000)
[SFLASH_Erase] 00160000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(36 percent : 0x00290000)
[SFLASH_Erase] 00170000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(38 percent : 0x00280000)
[SFLASH_Erase] 00180000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(40 percent : 0x00270000)
[SFLASH_Erase] 00190000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(41 percent : 0x00260000)
[SFLASH_Erase] 001A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(43 percent : 0x00250000)
[SFLASH_Erase] 001B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(44 percent : 0x00240000)
[SFLASH_Erase] 001C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(46 percent : 0x00230000)
[SFLASH_Erase] 001D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(47 percent : 0x00220000)
[SFLASH_Erase] 001E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(49 percent : 0x00210000)
[SFLASH_Erase] 001F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(50 percent : 0x00200000)
[SFLASH_Erase] 00200000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(52 percent : 0x001F0000)
[SFLASH_Erase] 00210000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(54 percent : 0x001E0000)
[SFLASH_Erase] 00220000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(55 percent : 0x001D0000)
[SFLASH_Erase] 00230000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(57 percent : 0x001C0000)
[SFLASH_Erase] 00240000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(58 percent : 0x001B0000)
[SFLASH_Erase] 00250000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(60 percent : 0x001A0000)
[SFLASH_Erase] 00260000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(61 percent : 0x00190000)
[SFLASH_Erase] 00270000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(63 percent : 0x00180000)
[SFLASH_Erase] 00280000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(65 percent : 0x00170000)
[SFLASH_Erase] 00290000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(66 percent : 0x00160000)
[SFLASH_Erase] 002A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(68 percent : 0x00150000)
[SFLASH_Erase] 002B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(69 percent : 0x00140000)
[SFLASH_Erase] 002C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(71 percent : 0x00130000)
[SFLASH_Erase] 002D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(72 percent : 0x00120000)
[SFLASH_Erase] 002E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(74 percent : 0x00110000)
[SFLASH_Erase] 002F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(75 percent : 0x00100000)
[SFLASH_Erase] 00300000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(77 percent : 0x000F0000)
[SFLASH_Erase] 00310000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(79 percent : 0x000E0000)
[SFLASH_Erase] 00320000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(80 percent : 0x000D0000)
[SFLASH_Erase] 00330000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(82 percent : 0x000C0000)
[SFLASH_Erase] 00340000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(83 percent : 0x000B0000)
[SFLASH_Erase] 00350000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(85 percent : 0x000A0000)
[SFLASH_Erase] 00360000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(86 percent : 0x00090000)
[SFLASH_Erase] 00370000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(88 percent : 0x00080000)
[SFLASH_Erase] 00380000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(90 percent : 0x00070000)
[SFLASH_Erase] 00390000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(91 percent : 0x00060000)
[SFLASH_Erase] 003A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(93 percent : 0x00050000)
[SFLASH_Erase] 003B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(94 percent : 0x00040000)
[SFLASH_Erase] 003C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(96 percent : 0x00030000)
[SFLASH_Erase] 003D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(97 percent : 0x00020000)
[SFLASH_Erase] 003E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(99 percent : 0x00010000)
[SFLASH_Erase] 003F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(100 percent : 0x00000000)
FlashCheckSum
check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End
=>check sum is valid
Reset Printer
System will be reset in 1 sec....
Loading boot application...
[NG0x00000000]
Boot : Egmont(C3N) V0.12 08-01-2011
<Winbond W25Q64>
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x01500000)...
Decompressing Kernel to RAM
src_addr = 0x0150000C, dest_addr = 0x00100000, ul_size = 0x0028AC00
Decompress .......................................................................... Done
Kernel Start [0x00100000]
FW Upgrade JUMP : 00392D8C
RootWriteMonitorProgram : 000101B8
Serial Init for polling msg. sysHwInit : 651
hardWareInterFaceInit
sysHwInit2 753
sysHwInit2 760
Host Name: bootHost
Target Name: vxTarget
User: target
ExceptionCheckMessage
====================== Check Boot [0x0]
//////////////////////////////////////////////////////////////
// VxWorks Stack Remain for Kernel..
mem 0
i
p
q
mem 4
mem 5
mem 8
mem 9
// VxWorks Stack Free = (0077dfc0)
//RAM_LOW_ADRS = 00100000
//sysPhysMemTop = 04000000
//sysMemTop = 01400000
//////////////////////////////////////////////////////////////
<<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
FFDrv_CheckInstall 1
pDCB->ulSPINo 0
pDCB->ulSlaveDevChannel 0
<<<LogMsg_PrintOff>>>
<<<LogMsg_EngPrintOff>>>
Model Code : SCX3405
Main Kernel F/W Version : V3.00.01.18
Main Kernel F/W Date : DEC-21-2012
DRAM:>
<<<HAL_InitWDT>>> WatchDog Initialized !!!
Check PowerOn Mode PBA Port ---- ( GPIO1Ctrl - 0xde73c006 GPIO1Dir - 0x868cfff9 GPIO1In - 0xee00ffc2 )
Check PowerOn Mode PBA Port ---- ( GPIO2Ctrl - 0xfb446b7f GPIO2Dir - 0xe22400 GPIO2In - 0x1cffa000 )
################### Normal Mode Start##########################
PrnVPUDrv Driver is Installed successfully
PrnVPUDrv Driver:Create and Added Device to DM(Handle=5783824)
*********************************************************************
[ImTMAA_RegisterItems] Error... JBIG ENC/DEC Function Needed...
*********************************************************************
USB Port ON
i
p
q
Warning!!
Warning!!
[ConAdmin] Mem Alloc Size (204800), Avail (57344) in /home/single/csqa/csqa_gv3_egmont/GV3_System/GV3_Source/Subsystem/ConSS/App/ConIDS/IDS_Main.c 229 line
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
NoEndOutcry:
А есть какая-нибудь распиновка тх и рх с другой стороны, со стороны перемычки? У меня оторвался тх с корнем, теперь вообще не понятно к чему подпаиваться.
NoEndOutcry:
Разобрался. Шьется. Оригинал прошило. А есть для него фиксы в свободном доступе или только покупка?
Навигация
Перейти к полной версии