Общение > Прошивки
SCX3400 можно ли понизить версию прошивки через дебаг?
eg0r0v:
a 3405FW реально по дебагу понизить?
Demosfen:
Подскажите пожалуйста возможно ли понизить прошивку с 18 на 12 командой "pm.l 12d44 e3a00001" на SCX-3400?
vxd:
Доброго времени суток. Присоединяюсь к последнему посту.
Имею 3400 в.18.
припаял дебаг,
Do you want to download from external port?[N] : n
No
vxshell> pm.l 12d44 e3a00001
invalid command format
соответственно не могу влить в.12
подскажите куда копать? другая команда нужна...
в стол заказов? Дык, до субботы еще 3 дня....
спасибо.
(click to show/hide)~
Loading boot application...
[NG0x00000000]
Boot : Egmont(C3N) V0.12 08-01-2011
<Giga Device GD25Q32>
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x01500000)...
Decompressing Kernel to RAM
src_addr = 0x0150000C, dest_addr = 0x00100000, ul_size = 0x0028AC00
Decompress ....................................................................
...... Done
Kernel Start [0x00100000]
FW Upgrade JUMP : 00392D8C
RootWriteMonitorProgram : 000101B8
Serial Init for polling msg. sysHwInit : 651
hardWareInterFaceInit
sysHwInit2 753
sysHwInit2 760
Host Name: bootHost
Target Name: vxTarget
User: target
ExceptionCheckMessage
====================== Check Boot [0xffffffff]
//////////////////////////////////////////////////////////////
// VxWorks Stack Remain for Kernel..
mem 0
i
p
q
mem 4
mem 5
mem 8
mem 9
// VxWorks Stack Free = (0077dfc0)
//RAM_LOW_ADRS = 00100000
//sysPhysMemTop = 04000000
//sysMemTop = 01400000
//////////////////////////////////////////////////////////////
<<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
FFDrv_CheckInstall 1
pDCB->ulSPINo 0
pDCB->ulSlaveDevChannel 0
<<<LogMsg_PrintOff>>>
<<<LogMsg_EngPrintOff>>>
Model Code : SCX3405
Main Kernel F/W Version : V3.00.01.18
Main Kernel F/W Date : DEC-21-2012
DRAM:>
<<<HAL_InitWDT>>> WatchDog Initialized !!!
Check PowerOn Mode PBA Port ---- ( GPIO1Ctrl - 0xde73c006 GPIO1Dir - 0x868cfff9
GPIO1In - 0xee00f982 )
Check PowerOn Mode PBA Port ---- ( GPIO2Ctrl - 0xfb446b7f GPIO2Dir - 0xe22400 G
PIO2In - 0x1cffa000 )
################### Normal Mode Start##########################
PrnVPUDrv Driver is Installed successfully
PrnVPUDrv Driver:Create and Added Device to DM(Handle=5783824)
*********************************************************************
[ImTMAA_RegisterItems] Error... JBIG ENC/DEC Function Needed...
*********************************************************************
USB Port ON
i
p
q
Warning!!
Warning!!
[ConAdmin] Mem Alloc Size (204800), Avail (57344) in /home/single/csqa/csqa
_gv3_egmont/GV3_System/GV3_Source/Subsystem/ConSS/App/ConIDS/IDS_Main.c 229 line
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
Loading boot application...
[NG0x00000000]
Boot : Egmont(C3N) V0.12 08-01-2011
<Giga Device GD25Q32>
Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry
----------------------------------------------------------------
START-UP MODE : Monitor Program
[Type 'help' to see command info.]
Version : Egmont(C3N) V0.12 08-01-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
No
vxshell> pm.l 12d44 e3a00001
invalid command format
vxshell> fl
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
<Giga Device GD25Q32>
Verify Image : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
Model : 0x00000000
Flash Type : 0x00000000
Image Type : 0x00000000
temp_buf :
SIG : $IMG
Can not find signature
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x01900000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS><HS><HS>
Image includes PJL(0000001B) -> Waste 92 bytes
[[4194424 Bytes received]] - Complete Downloading
} /* Download End */
Verify Image : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000
Model : 0x05000063
Flash Type : 0x00130002
Image Type : 0x00000000
temp_buf : $KER
SIG : $IMG
FlashCheckSum
check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Boot image!
Found new kernel(0x0194001C)!!!!
Decompress ....................................................................
... Done
Decompress ....................................................................
...... Done
cur : 0x3000118, new : 0x3000108
Encryption Kernel check Error
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Againя
Loading boot application...
[NG0x00000000]
Boot : Egmont(C3N) V0.12 08-01-2011
<Giga Device GD25Q32>
Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry
----------------------------------------------------------------
START-UP MODE : Monitor Program
[Type 'help' to see command info.]
Version : Egmont(C3N) V0.12 08-01-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
No
vxshell> fl
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
<Giga Device GD25Q32>
Verify Image : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
Model : 0x00000000
Flash Type : 0x00000000
Image Type : 0x00000000
temp_buf :
SIG : $IMG
Can not find signature
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x01900000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 92 bytes
[[4194424 Bytes received]] - Complete Downloading
} /* Download End */
Verify Image : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000
Model : 0x05000063
Flash Type : 0x00130002
Image Type : 0x00000000
temp_buf : $KER
SIG : $IMG
FlashCheckSum
check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Boot image!
Found new kernel(0x0194001C)!!!!
Decompress ....................................................................
... Done
Decompress ....................................................................
...... Done
cur : 0x3000118, new : 0x3000112
Encryption Kernel check Error
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
Anton:
купи разовый код для генера и не жди субботы...быстро, дешево, удобно! :))
apopovv:
You are not allowed to view links.
Register or LoginЗдравствуйте! Пришлите пожалуйста прошивку для принтера samsung SCX-3400 .
версия прошивки: v3.00.01.18 DEC-21-2012 (SCX3405) . Серийный номер : Z6ZVB8KD4F01KFH . CRUM-130408S9139.
You are not allowed to view links.
Register or Login
Спасибо!
--- Конец цитаты ---
В этом разделе не раздают.
Навигация
Перейти к полной версии