ML-1860 проблема

[Nuka]

сегодня притащили 1860 с сообщением "несовместимый картридж с тонером". Дело ясно - видимо после известного фикса. Не долго думая,  сразу по привычке готовлю фикс под него (19v), принудиловка - и в перёд..и тут засада, фикс не глотает. Пробую вскормить оригинал - тоже не глотает ((. Смотрю серийник в usbprns3 - совпадает с шильдиком, ввожу принтер в принудиловку - серийник по нулям, разве так должно быть ? чё-то я в ступор вошёл  чё делать ?

[Aleksey Mo-skin]

В принудиловке так и должно быть.

[Aleksey Mo-skin]

Шей 25 МА или дай серийник - сделаю 28.

[Nuka]

так оригинал не заливается почему-то..

[Aleksey Mo-skin]

Может версия старше 19-й, потому и не заливается. Подключи дебаг- все увидишь.

[Nuka]

ща попробую, на 1860 пока ни разу дебаг не цеплял..
ещё нашёл такую инфу : "Прошивка принтера 24-й версией поверх 19-й выведет аппарат из строя.
", это что ещё за фигня ?

[apopovv]

Бред.
Работает всё.

[Aleksey Mo-skin]

Лично прошивал на с 19 на 28.

[Nuka]

это инфа из usbprns3 ))

[Aleksey Mo-skin]

это инфа из usbprns3 ))

За это и не люблю барыг - зарабатывают не только на отсутствии знаний, но и заведомо вводят людей в заблуждение.

[Nuka]

так, подключил дебаг, при включении -в терминале пустота, при включении с зажатой N :
[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...
Loading Kernel...
New kernel!
checksum is valid
BC is OK
Loading Emulation..
Run Kernel..
Assert ::

и всё..., больше ничего не выдаёт 

[Aleksey Mo-skin]

Надо перемычку припаять на место отсутствующего R17 (или другой, точно не помню), тогда он будет принимать команды.

[Aleksey Mo-skin]

You are not allowed to view links. Register or Login

[Nuka]

вот лог с дебага, чёт я не пойму, что за версия в нём..

(click to show/hide)

FlashCheckSum

check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End

=>check sum is valid

Reset Printer



 System will be reset in 1 sec....


Loading boot application...
[NG0x00000000]

 Boot : Egmont(C3N) V0.12 08-01-2011
 <Giga Device GD25Q32>

Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x01500000)...
Decompressing Kernel to RAM
src_addr = 0x0150000C, dest_addr = 0x00100000, ul_size = 0x0028AC00

 Decompress ....................................................................
... Done
Kernel Start [0x00100000]

 FW Upgrade JUMP : 00384A8C
 RootWriteMonitorProgram : 000101B8
Serial Init for polling msg. sysHwInit : 651
 hardWareInterFaceInit
sysHwInit2 753

sysHwInit2 760
Host Name: bootHost
Target Name: vxTarget
User: target

 ExceptionCheckMessage
====================== Check Boot [0xffffffff]
//////////////////////////////////////////////////////////////
//      VxWorks Stack Remain for Kernel..
mem 0
i
p
q
mem 4
mem 5
mem 8
mem 9
//      VxWorks Stack Free = (007a8fb0)
//RAM_LOW_ADRS  = 00100000
//sysPhysMemTop = 04000000
//sysMemTop     = 01400000
//////////////////////////////////////////////////////////////
 <<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
 FFDrv_CheckInstall 1
 pDCB->ulSPINo 0
 pDCB->ulSlaveDevChannel 0
<<<LogMsg_PrintOff>>>
<<<LogMsg_EngPrintOff>>>
 Model Code : SCX3405
 Main Kernel F/W Version : V3.00.01.12
 Main Kernel F/W Date : MAY-18-2012
DRAM:>
<<<HAL_InitWDT>>> WatchDog Initialized !!!
 Check PowerOn Mode PBA Port ---- ( GPIO1Ctrl - 0xde73c006 GPIO1Dir - 0x868cfff9
 GPIO1In - 0xee00fdc2 )
 Check PowerOn Mode PBA Port ---- ( GPIO2Ctrl - 0xfb446b7f GPIO2Dir - 0xe22400 G
PIO2In - 0x1cff8000 )
 ################### Normal Mode Start##########################
PrnVPUDrv Driver is Installed successfully
PrnVPUDrv Driver:Create and Added Device to DM(Handle=5620808)
*********************************************************************
[ImTMAA_RegisterItems] Error... JBIG ENC/DEC Function Needed...
*********************************************************************

 USB Port ON
i
p
q
Warning!!
Warning!!
[ConAdmin] Mem Alloc Size (204800),      Avail (57344) in /home2/gv3system/prave
en.n/EC-19MAY/Egmont/GV3_Source/Subsystem/ConSS/App/ConIDS/IDS_Main.c 229 line
 dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
 dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]


Boot&Mon. CheckSum OK!

[SFLASH_InitFLASH][NG]
[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...

<CPU:375Mhz RAM:166Mhz SysClk:125Mhz DDR2>

----------------------------------------------------------------
START-UP MODE : Monitor Program
  Boot into pROBE+ like stand-alone mode
  [Type 'help' to see command info.]
  Version : Ver.1.20 (BlueMT) 2011-04-27
----------------------------------------------------------------
Do you want to download from external port?[N] : n

pROBE+> rl
Enter Start Address[0x40100000] : 0x
Ready to download from Parallel/Usb/Serial (0x40100000)
-------------------------
Samsung OTG, 2006
Link ID   : [00000000]
-------------------------
Drv "design ware core" USB download<HS><HS><EPB_RX 0x00000200>
Special Image is downloading(font, etc)...
-> Address is 0x40100000
[[4194304 Bytes received]] - Complete Downloading

Do you want to debug on? Press y or Y key within 3 second !!
Compress Type        : 0xE59FF054
Binary Start Address : 0xE59FF054
Binary Size          : 0xE59F0054
Binary Source Address: 0x40100024
[ERR]Invalid Image Format. Check image!!


pROBE+> fp.spi.ep 40100000 0 400000
source addr = 0x40100000, dest addr = 0x00000000, length = 0x00400000

[SFLASH_InitFLASH][NG]
 ----------------------------------------
SCLK Low = 0x00000003
SCLK High = 0x00000003
PreScale = 0x00000000
Divide = 8
Serial Clock =  15625000.000000 HZ, 15.625000 MHZ
0x00004000 words - 0x00010000 bytes programmed(2 percent : 0x003F0000)
0x00004000 words - 0x00010000 bytes programmed(4 percent : 0x003E0000)
0x00004000 words - 0x00010000 bytes programmed(5 percent : 0x003D0000)
0x00004000 words - 0x00010000 bytes programmed(7 percent : 0x003C0000)
0x00004000 words - 0x00010000 bytes programmed(8 percent : 0x003B0000)
0x00004000 words - 0x00010000 bytes programmed(10 percent : 0x003A0000)
0x00004000 words - 0x00010000 bytes programmed(11 percent : 0x00390000)
0x00004000 words - 0x00010000 bytes programmed(13 percent : 0x00380000)
0x00004000 words - 0x00010000 bytes programmed(15 percent : 0x00370000)
0x00004000 words - 0x00010000 bytes programmed(16 percent : 0x00360000)
0x00004000 words - 0x00010000 bytes programmed(18 percent : 0x00350000)
0x00004000 words - 0x00010000 bytes programmed(19 percent : 0x00340000)
0x00004000 words - 0x00010000 bytes programmed(21 percent : 0x00330000)
0x00004000 words - 0x00010000 bytes programmed(22 percent : 0x00320000)
0x00004000 words - 0x00010000 bytes programmed(24 percent : 0x00310000)
0x00004000 words - 0x00010000 bytes programmed(25 percent : 0x00300000)
0x00004000 words - 0x00010000 bytes programmed(27 percent : 0x002F0000)
0x00004000 words - 0x00010000 bytes programmed(29 percent : 0x002E0000)
0x00004000 words - 0x00010000 bytes programmed(30 percent : 0x002D0000)
0x00004000 words - 0x00010000 bytes programmed(32 percent : 0x002C0000)
0x00004000 words - 0x00010000 bytes programmed(33 percent : 0x002B0000)
0x00004000 words - 0x00010000 bytes programmed(35 percent : 0x002A0000)
0x00004000 words - 0x00010000 bytes programmed(36 percent : 0x00290000)
0x00004000 words - 0x00010000 bytes programmed(38 percent : 0x00280000)
0x00004000 words - 0x00010000 bytes programmed(40 percent : 0x00270000)
0x00004000 words - 0x00010000 bytes programmed(41 percent : 0x00260000)
0x00004000 words - 0x00010000 bytes programmed(43 percent : 0x00250000)
0x00004000 words - 0x00010000 bytes programmed(44 percent : 0x00240000)
0x00004000 words - 0x00010000 bytes programmed(46 percent : 0x00230000)
0x00004000 words - 0x00010000 bytes programmed(47 percent : 0x00220000)
0x00004000 words - 0x00010000 bytes programmed(49 percent : 0x00210000)
0x00004000 words - 0x00010000 bytes programmed(50 percent : 0x00200000)
0x00004000 words - 0x00010000 bytes programmed(52 percent : 0x001F0000)
0x00004000 words - 0x00010000 bytes programmed(54 percent : 0x001E0000)
0x00004000 words - 0x00010000 bytes programmed(55 percent : 0x001D0000)
0x00004000 words - 0x00010000 bytes programmed(57 percent : 0x001C0000)
0x00004000 words - 0x00010000 bytes programmed(58 percent : 0x001B0000)
0x00004000 words - 0x00010000 bytes programmed(60 percent : 0x001A0000)
0x00004000 words - 0x00010000 bytes programmed(61 percent : 0x00190000)
0x00004000 words - 0x00010000 bytes programmed(63 percent : 0x00180000)
0x00004000 words - 0x00010000 bytes programmed(65 percent : 0x00170000)
0x00004000 words - 0x00010000 bytes programmed(66 percent : 0x00160000)
0x00004000 words - 0x00010000 bytes programmed(68 percent : 0x00150000)
0x00004000 words - 0x00010000 bytes programmed(69 percent : 0x00140000)
0x00004000 words - 0x00010000 bytes programmed(71 percent : 0x00130000)
0x00004000 words - 0x00010000 bytes programmed(72 percent : 0x00120000)
0x00004000 words - 0x00010000 bytes programmed(74 percent : 0x00110000)
0x00004000 words - 0x00010000 bytes programmed(75 percent : 0x00100000)
0x00004000 words - 0x00010000 bytes programmed(77 percent : 0x000F0000)
0x00004000 words - 0x00010000 bytes programmed(79 percent : 0x000E0000)
0x00004000 words - 0x00010000 bytes programmed(80 percent : 0x000D0000)
0x00004000 words - 0x00010000 bytes programmed(82 percent : 0x000C0000)
0x00004000 words - 0x00010000 bytes programmed(83 percent : 0x000B0000)
0x00004000 words - 0x00010000 bytes programmed(85 percent : 0x000A0000)
0x00004000 words - 0x00010000 bytes programmed(86 percent : 0x00090000)
0x00004000 words - 0x00010000 bytes programmed(88 percent : 0x00080000)
0x00004000 words - 0x00010000 bytes programmed(90 percent : 0x00070000)
0x00004000 words - 0x00010000 bytes programmed(91 percent : 0x00060000)
0x00004000 words - 0x00010000 bytes programmed(93 percent : 0x00050000)
0x00004000 words - 0x00010000 bytes programmed(94 percent : 0x00040000)
0x00004000 words - 0x00010000 bytes programmed(96 percent : 0x00030000)
0x00004000 words - 0x00010000 bytes programmed(97 percent : 0x00020000)
0x00004000 words - 0x00010000 bytes programmed(99 percent : 0x00010000)
0x00004000 words - 0x00010000 bytes programmed(100 percent : 0x00000000)
 ----------------------------------------
 ulRefTimer(0xFFFFFFFF), ulCurrentTimer(0xFE7E704F)
 25874.579456 ms
 25.874579 s

pROBE+> reboot


pROBE+>

Boot&Mon. CheckSum OK!

[SFLASH_InitFLASH][NG]
[ WATCH DOG RESET  Booting... ]

Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
New kernel was found...

CHKSUM
{
check sum start address : 41000000, count : 001B0000
check sum : 0000A5A5
} /* Checksum End

Checksum OK!!
Kernel Data Read End
 Find Compressed Kernel
 Kernel UnZip Done!!
jump to 0x40080000
 ramsize= 406BFFFF, gsbsize = 40501204, FreeMemPtr = 40500548, FreeMemStart = 40
500548
 <<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
 Model Code : SCX3200
 Main Kernel F/W Version : V3.00.01.08
 Main Kernel F/W Date : OCT-18-2010
 Check PowerOn Mode PBA Port ---- ( GPIO3In - 0x2daff, GPIOIn - 0xef )
DRAM:>
 ################### Normal Mode Start##########################

[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...
Loading Kernel...
New kernel!
checksum is valid
BC is OK
Loading Emulation..
Run Kernel..
Assert :: ?
?
[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...
Loading Kernel...
New kernel!
checksum is valid
BC is OK
Loading Emulation..
Run Kernel..
Assert :: ?
?
[ POWER ON  Booting... ]


Pressed key...
Run Firmware Upgrade Mode...
Flash Data Download Address : 0x40400000

===============================
    Start flash_writer
===============================
FW src addr  : 0x40400018
FW dest addr : 0x00000000
FW size      : 0x00000000
<<<0x00000000>>>
<<<0x00000000>>>
Can not find sig

Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x40400000)
-------------------------
Link ID   : [4F54281A]
-------------------------
USB download<HS><HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 80 bytes
[[512104 Bytes received]] - Complete Downloading

} /* Download End */
FW src addr  : 0x40400018
FW dest addr : 0x00000000
FW size      : 0x0007D000
<<<0x00000000>>>
<<<0x00000000>>>
checksum is valid
Found new kernel(0x40415018)!!!!
Invalid img!
Not found new kernel!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...
Loading Kernel...
New kernel!
checksum is valid
BC is OK
Loading Emulation..
Run Kernel..
Assert ::

[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...
Loading Kernel...
New kernel!
checksum is valid
BC is OK
Loading Emulation..
Run Kernel..
Assert :: ?
?
[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...

<CPU:300Mhz RAM:100Mhz SysClk:100Mhz >

----------------------------------------------------------------
START-UP MODE : Monitor Program
  Boot into pROBE+ like stand-alone mode
  [Type 'help' to see command info.]
<<<0x00000000>>>
  Version : BLUEBIRD_R SEC Ver.0.50 2010-01-22 [1]
----------------------------------------------------------------
Do you want to download from external port?[N] : n

pROBE+> fl

Run Firmware Upgrade Mode...
Flash Data Download Address : 0x40400000

===============================
    Start flash_writer
===============================
FW src addr  : 0x40400018
FW dest addr : 0x00000000
FW size      : 0x00000000
<<<0x00000000>>>
<<<0x00000000>>>
Can not find sig

Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x40400000)
-------------------------
Link ID   : [4F54281A]
-------------------------
USB download<HS><HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 80 bytes
[[512104 Bytes received]] - Complete Downloading

} /* Download End */
FW src addr  : 0x40400018
FW dest addr : 0x00000000
FW size      : 0x0007D000
<<<0x00000000>>>
<<<0x00000000>>>
checksum is valid
Found new kernel(0x40415018)!!!!
Invalid img!
Not found new kernel!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again

[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...

<CPU:300Mhz RAM:100Mhz SysClk:100Mhz >

----------------------------------------------------------------
START-UP MODE : Monitor Program
  Boot into pROBE+ like stand-alone mode
  [Type 'help' to see command info.]
<<<0x00000000>>>
  Version : BLUEBIRD_R SEC Ver.0.50 2010-01-22 [1]
----------------------------------------------------------------
Do you want to download from external port?[N] : n

pROBE+>
----------------------------------------------------------------
Do you want to download from external port?[N] :


pROBE+>

[apopovv]

ггггг

 Model Code : SCX3405
 Main Kernel F/W Version : V3.00.01.12


Model Code : SCX3200
 Main Kernel F/W Version : V3.00.01.08


??