Общение > Прошивки
CLp 365 debug spi flash programmer HELP
(1/1)
iohan:
Hello friends
I want to debug printer clp 365
in DOWNLOAD MODE (Eco + Power button)
with my usb ttl converter
connected TX, RX, GND (image 1)
but I have a problem.
When I load the original firmware following error appears (image 2)
Downloaded Image is not valid
Reset target and run flash writing program again.
Where I'm wrong?
iohan:
UPDATE.for CLP 365
I put spi flash memory on my programmer MiniPro TL866cs
and I programmed "ready dumps" CLP360_V3.00.01.14.bin
from here You are not allowed to view links.
Register or Login
Everything went ok.
but another problem
The printer does not allow printing reports.
Black toner cartridge is not compatible. Check user's guide. (appears in Easy Printer Manager).
-I do not have another black chip.
- I tried to put on SPI FLASH MEMORY with the programmer, another fix firmware with another Crum , but the printer do not turn ON
What can I do in this situation?
Can be Black Crum series reading from memory chip spi flash with programmer? (how can i found black crum ?)
and then to create fixed firmware reset
or
can someone create me a fimware only with serial number (it appears in Easy Printer Manager Z6Y7BJEC7001BYH) ?
or
any other ideas are welcome.
thanks
iohan:
UPDATE.
I found a black original chip.
I put the cartridge. result (see image)
I printed reports (configuration and supplies information)
BLACK Crum _12092736279
I created fixed in the printer firmware and put in FORCE MODE (download mode).
After restarting the printer again bad result.
I loaded the original firmware again and returned to normal (with chip)
I FIX again with FIX_12092736279_CLP360_V3.00.01.14U.hd but not work.
what can be the PROBLEM?
can somebodyhelp me?
Aleksey Mo-skin:
The chip has already been used for another printer firmware.
iohan:
Yes. was taken from another printer reseted.
If I buy a new original chip will work?
How do I know before buying if it is original or not?
Навигация
Перейти к полной версии