Общение > Мне нужна прошивка
I need firmware fix Samsung ML-1670
apopovv:
V07 work for v04
Flash and Remove or tape chip
josepe:
Hi again,
There are two archives: 1670_V1.01.00.07NU.hd and 1670_V1.01.00.07U.hd
they work with all ML1670 serial numbers?
Which one must i use?
With which program i have to use it?
apopovv:
Work for all S/N
Use any file
Flash with usbprns2.exe You are not allowed to view links.
Register or Login
josepe:
Ok, then the steps would be:
1.CONNECT THE PRINTER TO THE PC CONTAINING THE PROGRAM ASSISTANT USB PORT, THE ONLY MUST BE CONNECTED BY PORT USB PRINTER.
2.MUST BE SET TO DEFAULT PRINTER AND BE THE ONLY OF THIS MODEL UNDER CONTROL PANEL PRINTERS
3.RUNNING THE PROGRAM usbprns2.exe
4.EJECUTE OR DRAG THE ARCHIVE 1670_V1.01.00.07NU.hd OR 1670_V1.01.00.07U.hd INTO USBPRNS2.EXE
RESET PROCEDURE MUST BE WITH ORIGINAL CARTRIDGE CHIP INSIDE YOUR PRINTER, NO CHIP TO BE COVERED WITH DUCT TAPE WHEN RESET
Is correct?
apopovv:
connect printer via usb. install driver or just close window "found new hardware"
drag fix into usbprns2. wait about 1 min. printer will be restarted
remove or tape chip
it is all
Навигация
Перейти к полной версии