это отчет операции прошивки через дебаг с u версии прошики...
.....
0x00004000 words - 0x00010000 bytes programmed(100 percent : 0x00000000)
FlashCheckSum
check sum start address : 0278001C, count : 00800000
check sum : 0000A5A5
} /* Checksum End
=>check sum is valid
Reset Printer
System will be reset in 1 sec....
Loading boot application...
[NG0x0000E747]
Boot : Egmont W(C3N) V0.12 08-01-2011
<Winbond W25Q64>
Verify Image : 0x02780000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
Model : 0x00000000
Flash Type : 0x00000000
Image Type : 0x00000000
temp_buf :
SIG : $IMG
Can not find signature
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x02000000)...
Decompressing Kernel to RAM
src_addr = 0x0200000C, dest_addr = 0x00100000, ul_size = 0x0068AC00
Decompress ....................................................................
................................................................................
................................................................................
................................................... Done
Kernel Start [0x00100000]
FW Upgrade JUMP : 00891884
RootWriteMonitorProgram : 000101C4
Serial Init for polling msg. sysHwInit : 647
hardWareInterFaceInit
[wifiEndDrvPlug] enter
[wifiEndDrvPlug] end
miiBusModeSet Error
sysHwInit2 752
sysHwInit2 759
Host Name: bootHost
Target Name[: vxTarget
User: target
wifiEndStart ] start
[wifiEnd] Link Up
[wifiEndStart ] end
Instantiating /ram as rawFs, device = 0x1
Formatting /ram for DOSFS
Instantiating /ram as rawFs, device = 0x1
Formatting...Retrieved old volume params with %38 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number 10000
Label:" " ...
Disk with 64 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT12, sectors per cluster 1
2 FAT copies, 54 clusters, 1 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 2
Root dir entries 112, sysId VXDOS12 , serial number 10000
Label:" " ...
OK.
ExceptionCheckMessage
====================== Check Boot [0xffffffff]
//////////////////////////////////////////////////////////////
// VxWorks Stack Remain for Kernel..
mem 0
i
p
q
mem 4
mem 5
mem 8
mem 9
// VxWorks Stack Free = (00395fc0)
//RAM_LOW_ADRS = 00100000
//sysPhysMemTop = 04000000
//sysMemTop = 01e80000
//////////////////////////////////////////////////////////////
<<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
FFDrv_CheckInstall 1
pDCB->ulSPINo 0
pDCB->ulSlaveDevChannel 0
<<<LogMsg_PrintOff>>>
<<<LogMsg_EngPrintOff>>>
Model Code : SCX3405W
Main Kernel F/W Version : V3.00.01.13
Main Kernel F/W Date : MAY-18-2012
DRAM:>
<<<HAL_InitWDT>>> WatchDog Initialized !!!
Check PowerOn Mode PBA Port ---- ( GPIO1Ctrl - 0xde73c006 GPIO1Dir - 0x868cfff9
GPIO1In - 0xee00efc2 )
Check PowerOn Mode PBA Port ---- ( GPIO2Ctrl - 0xfb446b7f GPIO2Dir - 0xe22400 G
PIO2In - 0x1cffa000 )
################### Normal Mode Start##########################
PrnVPUDrv Driver is Installed successfully
PrnVPUDrv Driver:Create and Added Device to DM(Handle=16318432)ipd: kill ipdhcpc
failed: not found
ipd: start ipdhcpc6 ok
======NICCON Init Finish!!=========
*********************************************************************
[ImTMAA_RegisterItems] Error... JBIG ENC/DEC Function Needed...
*********************************************************************MT1900 Task
Mode is 1
WLAN_BCM_P2P_Initialize 155
USB Port ON
i
p
q
Warning!!
Warning!!
[ConAdmin] Mem Alloc Size (204800), Avail (54784) in /home2/gv3system/prave
en.n/EC-19MAY/Egmont/GV3_Source/Subsystem/ConSS/App/ConIDS/IDS_Main.c 229 line
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
===>>> CJI_IF_PSH_GCPSetBusyState
======WSD Init Finish!!=========
теперь попробую прошить без дебага с ориг который ты мне отправил...
