Общение > Прошивки

4623f debug help

(1/1)

afdermon94:
(click to show/hide)[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...

<CPU:375Mhz RAM:166Mhz SysClk:125Mhz DDR2>

----------------------------------------------------------------
START-UP MODE : Monitor Program
  Boot into pROBE+ like stand-alone mode
  [Type 'help' to see command info.]
  Version : Ver.1.20 (LHOTSE_4IN1) 2009-07-07
----------------------------------------------------------------
Do you want to download from external port?[N] : n

pROBE+> help
-----ROM monitor command format-----------
dm   start_addr <byte_count>
dm.b start_addr <byte_count>
dm.w start_addr <byte_count>
dm.l start_addr <byte_count>
ESC  repeat memory dump
fm   start_addr  byte_count byte_value
fm.b start_addr  byte_count byte_value
fm.w start_addr  word_count word_value
fm.l start_addr  long_count long_value
pm   addr        byte_value
pm.b addr        byte_value
pm.w addr        word_value
pm.l addr        long_value
ul   byte_count  : upload image
cmp  src1_addr src2_addr size : compare memory

memcpy   source_addr dest_addr length : memory copy
ml    : Automatically download and execute the ram area binary
fl    : upgrade flash image
go   jmp_addr               
dl   load_addr             
--------------
eeprom cmd arg1 arg2 arg3 arg4
       info : find all EEPROMs
       gen channel sys_clock i2c_clock : generate prescaler and sclk value
           - sys_clock  : 100Mhz(0x64), 120Mhz(0x78),133Mhz(0x85)
           - i2c_clock  : 100Khz(0x64), 400Khz(0x190)
       read dev (0: Dimm0, 1:Dimm1, 4: Main, 5: ENP, 6:WENP)
       erase dev size: erase device with zero value
       read dev size : read device 
       ddr2w channel addr size type :  write DRAM dimm's SPD
           - channel:  i2c channel(0,1)
           - addr: eeprom address
           - size: 1(DDR2 Samsung 256MB x16), 2:(DDR2 Samsung 128MB x16), 3:(DDR2 Samsung 256MB x8), 4:(DDR2 Samsung 128MB x8)--------------
pll cmd arg1 arg2 arg3
       info : display pll information
       calc Fin Fout : calculate M/P/S values
         - Fin : Input Frequency(decimal)
         - Fout : Output Frequency(decimal)
ddr cmd arg1 arg2 arg3: ddr controller ( arg1, arg2, arg3 are hex value)
        cmd  : dqs,dqsdelay, dqsoutdelay, wrdqsshift,dump, mk, cas, size
               dqs - display searched dqs
               dqsdelay - display searched dqs delay
               dqsoutdelay - display searched dqs out delay
               wrdqsshift - display searched wr dqs shift
               dump - display current ddr controller register
               mk - display
               size - display current dram size
               info - display dram information
        arg1 : dram base address to test
        arg2 : start value
        arg2 : end value

memtest cmd arg1 arg2 : test memory( arg1, arg2 are hex value)
        cmd  : r, w, toggle, rwv, drwv,drw,dw,         


pROBE+>

pROBE+> ul
insufficient parameters


pROBE+>

pROBE+> ul byte_count:upload image
atox: pub_my_strtol = 0x40038211, image
invalid number 0x00000000


pROBE+>

pROBE+> eSc
invalid command format


pROBE+>

pROBE+> fL
invalid command format


pROBE+>

pROBE+> rl
invalid command format


pROBE+>

pROBE+> fl

Upgrade Flash ROM Image

FlashCheckSum
{
check sum start address : 40060000, count : 00014FFE
check sum : 0000A5A5
} /* Checksum End

==> Now program restarted on the RAM to program flash ROM(0x40060000)
jump to 0x40060000
Flash Data Download Address : 0x41000000

===============================
    Start flash_writer         
===============================
verify_Image : 0x41000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG : $IMG
Can not find sig
----------- Display Dcache Status ------------
    Control register       = 0x000510F8
    Icahe : ON
    Dcahe : OFF
    MMU   : OFF

Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x41000000)<FS><HS><FS><HS>
Download destination Address : 0x41000000
Image includes PJL(0000001B) -> Waste 48 bytes
[[4522008 Bytes received]] - Complete Downloading

} /* Download End */
verify_Image : 0x41000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00450000
model : 0x0500003C
flash type : 0x00020002
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG

FlashCheckSum
{
check sum start address : 41000018, count : 00450000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Found new kernel(0x41040018)!!!!
ZIP Dest : 0x4008F000
Kernel Data Read End

Навигация

[0] Главная страница сообщений