Fix-free forum | Прошивки принтеров и МФУ
Общение => Мне нужна прошивка => Тема начата: markinho от Март 29, 2013, 08:08:20 pm
-
Добрый день я бразильской, я должен сбросить принтер ML-1860 серийный Z5M7BDAB801482P CRUM - 00123456789
MLT-D104S ID Модель Дата 09/02/2011. большое спасибо
-
http://www.mediafire.com/?9va49uf9a4uyb2n
-
apopovv, спасибо, но это не сработало. Я думаю, что этот дефектный impressoara
-
May be your printer are damaged ?
-
Я думаю, что это имеет какой-то способ сделать некоторые сварки физически прыгать?
большое спасибо
-
Do not write in russian language, plase.
English, please.
-
is there any way to make the jump physically, sometimes uzo these resets when she gets caught with both lights on, do not know what can be.
Thanks for the trouble
-
If you try to print from computer - what says driver ?
-
the toner cartridge is incompatible
-
Try to fix in force mode (off printer, press upper key, hold him, press lower key, pause (1-2 sec), release)
Load fw with usbprns2 + file.
-
After fix firmware - taped chip!
-
Please explain to me simplifying, I could not understand.
-
Turn off printer
Press key Print screen on the printer
Turn on
-
Thank you, thank you thank you, worked very bem.obrigado friends
-
Ну, тупые.... (с)