Fix-free forum | Прошивки принтеров и МФУ
Общение => Мне нужна прошивка => Тема начата: juvenalbk от Август 22, 2013, 04:57:04 pm
-
Hello.
I've bought a Samsung ML-2165W printer 2 weeks ago. It worked perfectly so far.
Searching about toner prices, i've found that they are really expensive here, on Brazil. A new toner equals to half of the print's total price!!
Googling about, i've found a site that sell the toner powder. This way, i can refill my own toner with low cost.
Although, as you all know, this damn printer saves the toner CRUM number to prevent refilling.
I've heard that a custom firmware can bypass the printer's control of the toner. Is it true?
If yes, can please someone generate a firmware to my printer?
Also, what i need to do with this firmware? Just install? Or i must remove the toner's chip?
Printer details:
-Model: ML-2160 Series
-Serial: Z7BYBQACB00233Z
-Firmware: V3.00.01.10
-Toner: CRUM-12090439194
Thanks.
Thanks.
-
No one? :(
-
http://yadi.sk/d/u3WrA3ta8GEiX (http://yadi.sk/d/u3WrA3ta8GEiX)
-
Thank you, apopovv.
How do i install it? There is a thread on this forum explaining?
Thanks again.
-
Unzip and Run in command prompt:
usbprns2 [fix.hd]
-
Thanks.
Should i remove the toner's chip before i do that?
Should i connect the printer with USB cable?
-
Connect usb to printer
Fix
Remove chip
-
Thanks, apopovv.
It run without errors. How can i know if the fix was really installed?
-
Remove or tape chip and print any page.