Доброго времени.
Вот лог с попытки прошивки штатной V3.00.01.10:
Loading boot application...
[NG0x00000000]
Boot : Egmont FNW(C3N) V0.14 09-29-2011
<Winbond W25Q64>
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x02800000)...
Decompressing Kernel to RAM
src_addr = 0x0280000C, dest_addr = 0x00100000, ul_size = 0x007BFC00
Decompress ..........................................
[Zlib] err = -3
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
<Winbond W25Q64>
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x03000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 92 bytes
[[9457904 Bytes received]] - Complete Downloading
Verify Image : 0x03000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00800000
Model : 0x05000063
Flash Type : 0x00160002
Image Type : 0x00000000
Flash Slave: 0x00000000
temp_buf : $KER
SIG : $IMG
FlashCheckSum
check sum start address : 0300001C, count : 00800000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Boot image!
Found new kernel(0x0304001C)!!!!
Decompress ... Done
Version : 3000110
Decompress ..........................................
Check ROM Image... Image decompression failed...
Encryption Kernel check Error
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
Пробовал, вариант из этой http://fix-free.info/index.php/topic,1084.15.html (http://fix-free.info/index.php/topic,1084.15.html) темы, но безрезультатно.
По поводу дампов, к сожалению нет программатора, а так же правильного паяльника, боюсь убить плату...