Добрые люди кто нибудь может объяснить почему через дебаг принтер 3405F не принимает команды? перемычку ставил.
Принтер команду N не принимает(вообще не реагирует). еще раз скажу перемычку ставил, где нужно- прозвонил есть сигнал. дебаг исправный(проверял на 3200).
Вот логи дебага Loading boot application...
[NG0x00007A86]
Boot : Egmont F(C3N) V0.12 08-01-2011
<Winbond W25Q64>
Verify Image : 0x02780000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
Model : 0x00000000
Flash Type : 0x00000000
Image Type : 0x00000000
temp_buf :
SIG : $IMG
Can not find signature
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x02000000)...
Decompressing Kernel to RAM
src_addr = 0x0200000C, dest_addr = 0x00100000, ul_size = 0x0068AC00
Decompress ....................................................................
................................................................................
...... Done
Kernel Start [0x00100000]
FW Upgrade JUMP : 00533F6C
RootWriteMonitorProgram : 00010188
Serial Init for polling msg. sysHwInit : 651
hardWareInterFaceInit
sysHwInit2 753
sysHwInit2 760
Host Name: bootHost
Target Name: vxTarget
User: target
ExceptionCheckMessage
====================== Check Boot [0xffffffff]
//////////////////////////////////////////////////////////////
// VxWorks Stack Remain for Kernel..
mem 0
i
p
q
mem 4
mem 5
mem 8
mem 9
// VxWorks Stack Free = (00256fd0)
//RAM_LOW_ADRS = 00100000
//sysPhysMemTop = 04000000
//sysMemTop = 01380000
//////////////////////////////////////////////////////////////
<<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
FFDrv_CheckInstall 1
pDCB->ulSPINo 0
pDCB->ulSlaveDevChannel 0
<<<LogMsg_PrintOff>>>
<<<LogMsg_EngPrintOff>>>
Model Code : SCX3405F
Main Kernel F/W Version : V3.00.01.12
Main Kernel F/W Date : APR-05-2012
DRAM:>
<<<HAL_InitWDT>>> WatchDog Initialized !!!
Check PowerOn Mode PBA Port ---- ( GPIO1Ctrl - 0xde73c006 GPIO1Dir - 0x968cfff9
GPIO1In - 0xfe00cec2 )
Check PowerOn Mode PBA Port ---- ( GPIO2Ctrl - 0xfa44241f GPIO2Dir - 0x87fbfbe3
GPIO2In - 0x9fffe003 )
################### Normal Mode Start##########################
PrnVPUDrv Driver is Installed successfully
PrnVPUDrv Driver:Create and Added Device to DM(Handle=9536132)
*********************************************************************
[ImTMAA_RegisterItems] Error... JBIG ENC/DEC Function Needed...
*********************************************************************
USB Port ON
Warning!!
Warning!!
[ConAdmin] Mem Alloc Size (204800), Avail (57344) in /home2/gv3system/swaro
op.jr/Egmont_12/GV3_System/GV3_Source/Subsystem/ConSS/App/ConIDS/IDS_Main.c 229
line
FFDrv_CheckInstall 1
pDCB->ulSPINo 0
pDCB->ulSlaveDevChannel 1
i
p
q