Fix-free forum | Прошивки принтеров и МФУ

Общение => Помогите! => Тема начата: bregnev от Апрель 04, 2013, 03:51:32 pm

Название: samsung SCX 3400. Трабл с прошивкой (в 10NU) [РЕШЕНО]
Отправлено: bregnev от Апрель 04, 2013, 03:51:32 pm

Добрый день!

Во время прошивки данного аппарата отрубился свет(шил да без ИБП) Теперь аппарат включается и печатает и с компа и копии делает, НО при попытке распечатать внутренний тест перезагружается.

Его просто кидать на дебаг? или придется бубнами стучать?

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: Nikita от Апрель 04, 2013, 03:55:15 pm

сделать полный сброс командой FC и если не поможет то через дебаг залить оригинал потом фикс!

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: bregnev от Апрель 04, 2013, 04:00:23 pm

FC сбрасывать на определенный регион? сейчас установлена Россия(22)

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: Nikita от Апрель 04, 2013, 04:16:08 pm

You are not allowed to view links. Register or Login

FC сбрасывать на определенный регион? сейчас установлена Россия(22)

без разницы пусть будет 22

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: bregnev от Апрель 04, 2013, 04:48:32 pm

Вот лог терминала. заливаю фикс(оригинала 10-го нет(

(click to show/hide)

Loading boot application...
[NG0x0000AE51]

 Boot : Egmont(C3N) V0.12 08-01-2011
 <Winbond W25Q32>

Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x01500000)...
Decompressing Kernel to RAM
src_addr = 0x0150000C, dest_addr = 0x00100000, ul_size = 0x0028AC00

 Decompress ....................................................................
... Done
Kernel Start [0x00100000]

 FW Upgrade JUMP : 003846E4
 RootWriteMonitorProgram : 000101B8
Serial Init for polling msg. sysHwInit : 651
 hardWareInterFaceInit
sysHwInit2 753

sysHwInit2 760
Host Name: bootHost
Target Name: vxTarget
User: target

 ExceptionCheckMessage
====================== Check Boot [0xffffffff]
//////////////////////////////////////////////////////////////
//      VxWorks Stack Remain for Kernel..
//      VxWorks Stack Free = (0079efd0)
//RAM_LOW_ADRS  = 00100000
//sysPhysMemTop = 04000000
//sysMemTop     = 01400000
//////////////////////////////////////////////////////////////
 <<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
 FFDrv_CheckInstall 1
 pDCB->ulSPINo 0
 pDCB->ulSlaveDevChannel 0
<<<LogMsg_PrintOff>>>
<<<LogMsg_EngPrintOff>>>
 Model Code : SCX3405
 Main Kernel F/W Version : V3.00.01.10
 Main Kernel F/W Date : JAN-23-2012
DRAM:>
<<<HAL_InitWDT>>> WatchDog Initialized !!!
 Check PowerOn Mode PBA Port ---- ( GPIO1Ctrl - 0xde73c006 GPIO1Dir - 0x868cfff9
 GPIO1In - 0xee04c002 )
 Check PowerOn Mode PBA Port ---- ( GPIO2Ctrl - 0xfb446b7f GPIO2Dir - 0xe22400 G
PIO2In - 0x1cffa000 )
 ################### Normal Mode Start##########################
PrnVPUDrv Driver is Installed successfully
PrnVPUDrv Driver:Create and Added Device to DM(Handle=5657896)
*********************************************************************
[ImTMAA_RegisterItems] Error... JBIG ENC/DEC Function Needed...
*********************************************************************

 USB Port ON
Warning!!
Warning!!
[ConAdmin] Mem Alloc Size (204800),      Avail (57344) in /home2/gv3system/swaro
op.jr/Egmont/Jan23/GV3_System/GV3_Source/Subsystem/ConSS/App/ConIDS/IDS_Main.c 2
29 line
 dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
 dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]

Loading boot application...
[NG0x0000AE51]

 Boot : Egmont(C3N) V0.12 08-01-2011
 <Winbond W25Q32>

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------
  START-UP MODE : Monitor Program
  [Type 'help' to see command info.]
  Version : Egmont(C3N) V0.12 08-01-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : ?
No
vxshell> fl

Upgrade Flash ROM Image

===============================
    Start flash_writer
===============================
 <Winbond W25Q32>
Verify Image             : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00000000
 Model      : 0x00000000
 Flash Type : 0x00000000
 Image Type : 0x00000000
temp_buf :
SIG : $IMG

Can not find signature


Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x01900000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 92 bytes
[[4194424 Bytes received]] - Complete Downloading

} /* Download End */

Verify Image             : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count       : 0x00400000
 Model      : 0x05000063
 Flash Type : 0x00130002
 Image Type : 0x00000000
temp_buf : $KER
SIG : $IMG

FlashCheckSum

check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
Found new kernel(0x0194001C)!!!!
 Decompress ....................................................................
... Done
 Decompress ....................................................................
... Done
cur : 0x10, new : 0x10
This is a valid image.!!!!
 Encryption Kernel check  OK

[[[[[ Flash Writing : BASE : 0x00000000]]]]]
SPI No. from - to ( 0 - 0)
flash_start_addr : 0x00000000
flash_end_addr   : 0x00400000
flash_data_size  : 0x00400000
src_image_start_addr : 0x0190001C
 [SFLASH_Erase] 00000000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(2 percent : 0x003F0000)
 [SFLASH_Erase] 00010000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(4 percent : 0x003E0000)
 [SFLASH_Erase] 00020000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(5 percent : 0x003D0000)
 [SFLASH_Erase] 00030000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(7 percent : 0x003C0000)
 [SFLASH_Erase] 00040000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(8 percent : 0x003B0000)
 [SFLASH_Erase] 00050000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(10 percent : 0x003A0000)
 [SFLASH_Erase] 00060000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(11 percent : 0x00390000)
 [SFLASH_Erase] 00070000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(13 percent : 0x00380000)
 [SFLASH_Erase] 00080000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(15 percent : 0x00370000)
 [SFLASH_Erase] 00090000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(16 percent : 0x00360000)
 [SFLASH_Erase] 000A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(18 percent : 0x00350000)
 [SFLASH_Erase] 000B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(19 percent : 0x00340000)
 [SFLASH_Erase] 000C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(21 percent : 0x00330000)
 [SFLASH_Erase] 000D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(22 percent : 0x00320000)
 [SFLASH_Erase] 000E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(24 percent : 0x00310000)
 [SFLASH_Erase] 000F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(25 percent : 0x00300000)
 [SFLASH_Erase] 00100000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(27 percent : 0x002F0000)
 [SFLASH_Erase] 00110000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(29 percent : 0x002E0000)
 [SFLASH_Erase] 00120000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(30 percent : 0x002D0000)
 [SFLASH_Erase] 00130000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(32 percent : 0x002C0000)
 [SFLASH_Erase] 00140000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(33 percent : 0x002B0000)
 [SFLASH_Erase] 00150000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(35 percent : 0x002A0000)
 [SFLASH_Erase] 00160000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(36 percent : 0x00290000)
 [SFLASH_Erase] 00170000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(38 percent : 0x00280000)
 [SFLASH_Erase] 00180000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(40 percent : 0x00270000)
 [SFLASH_Erase] 00190000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(41 percent : 0x00260000)
 [SFLASH_Erase] 001A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(43 percent : 0x00250000)
 [SFLASH_Erase] 001B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(44 percent : 0x00240000)
 [SFLASH_Erase] 001C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(46 percent : 0x00230000)
 [SFLASH_Erase] 001D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(47 percent : 0x00220000)
 [SFLASH_Erase] 001E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(49 percent : 0x00210000)
 [SFLASH_Erase] 001F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(50 percent : 0x00200000)
 [SFLASH_Erase] 00200000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(52 percent : 0x001F0000)
 [SFLASH_Erase] 00210000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(54 percent : 0x001E0000)
 [SFLASH_Erase] 00220000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(55 percent : 0x001D0000)
 [SFLASH_Erase] 00230000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(57 percent : 0x001C0000)
 [SFLASH_Erase] 00240000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(58 percent : 0x001B0000)
 [SFLASH_Erase] 00250000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(60 percent : 0x001A0000)
 [SFLASH_Erase] 00260000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(61 percent : 0x00190000)
 [SFLASH_Erase] 00270000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(63 percent : 0x00180000)
 [SFLASH_Erase] 00280000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(65 percent : 0x00170000)
 [SFLASH_Erase] 00290000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(66 percent : 0x00160000)
 [SFLASH_Erase] 002A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(68 percent : 0x00150000)
 [SFLASH_Erase] 002B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(69 percent : 0x00140000)
 [SFLASH_Erase] 002C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(71 percent : 0x00130000)
 [SFLASH_Erase] 002D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(72 percent : 0x00120000)
 [SFLASH_Erase] 002E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(74 percent : 0x00110000)
 [SFLASH_Erase] 002F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(75 percent : 0x00100000)
 [SFLASH_Erase] 00300000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(77 percent : 0x000F0000)
 [SFLASH_Erase] 00310000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(79 percent : 0x000E0000)
 [SFLASH_Erase] 00320000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(80 percent : 0x000D0000)
 [SFLASH_Erase] 00330000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(82 percent : 0x000C0000)
 [SFLASH_Erase] 00340000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(83 percent : 0x000B0000)
 [SFLASH_Erase] 00350000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(85 percent : 0x000A0000)
 [SFLASH_Erase] 00360000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(86 percent : 0x00090000)
 [SFLASH_Erase] 00370000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(88 percent : 0x00080000)
 [SFLASH_Erase] 00380000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(90 percent : 0x00070000)
 [SFLASH_Erase] 00390000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(91 percent : 0x00060000)
 [SFLASH_Erase] 003A0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(93 percent : 0x00050000)
 [SFLASH_Erase] 003B0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(94 percent : 0x00040000)
 [SFLASH_Erase] 003C0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(96 percent : 0x00030000)
 [SFLASH_Erase] 003D0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(97 percent : 0x00020000)
 [SFLASH_Erase] 003E0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(99 percent : 0x00010000)
 [SFLASH_Erase] 003F0000, 00010000, 00010000
0x00004000 words - 0x00010000 bytes programmed(100 percent : 0x00000000)

FlashCheckSum

check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End

=>check sum is valid

Reset Printer



 System will be reset in 1 sec....


Loading boot application...
[NG0x0000AE51]

 Boot : Egmont(C3N) V0.12 08-01-2011
 <Winbond W25Q32>

Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x01500000)...
Decompressing Kernel to RAM
src_addr = 0x0150000C, dest_addr = 0x00100000, ul_size = 0x0028AC00

 Decompress ....................................................................
... Done
Kernel Start [0x00100000]

 FW Upgrade JUMP : 003846E4
 RootWriteMonitorProgram : 000101B8
Serial Init for polling msg. sysHwInit : 651
 hardWareInterFaceInit
sysHwInit2 753

sysHwInit2 760
Host Name: bootHost
Target Name: vxTarget
User: target

 ExceptionCheckMessage
====================== Check Boot [0xffffffff]
//////////////////////////////////////////////////////////////
//      VxWorks Stack Remain for Kernel..
//      VxWorks Stack Free = (0079efd0)
//RAM_LOW_ADRS  = 00100000
//sysPhysMemTop = 04000000
//sysMemTop     = 01400000
//////////////////////////////////////////////////////////////
 <<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
 FFDrv_CheckInstall 1
 pDCB->ulSPINo 0
 pDCB->ulSlaveDevChannel 0
<<<LogMsg_PrintOff>>>
<<<LogMsg_EngPrintOff>>>
 Model Code : SCX3405
 Main Kernel F/W Version : V3.00.01.10
 Main Kernel F/W Date : JAN-23-2012
DRAM:>
<<<HAL_InitWDT>>> WatchDog Initialized !!!
 Check PowerOn Mode PBA Port ---- ( GPIO1Ctrl - 0xde73c006 GPIO1Dir - 0x868cfff9
 GPIO1In - 0xee00ed82 )
 Check PowerOn Mode PBA Port ---- ( GPIO2Ctrl - 0xfb446b7f GPIO2Dir - 0xe22400 G
PIO2In - 0x1cffa000 )
 ################### Normal Mode Start##########################
PrnVPUDrv Driver is Installed successfully
PrnVPUDrv Driver:Create and Added Device to DM(Handle=5657896)
*********************************************************************
[ImTMAA_RegisterItems] Error... JBIG ENC/DEC Function Needed...
*********************************************************************

 USB Port ON
Warning!!
Warning!!
[ConAdmin] Mem Alloc Size (204800),      Avail (57344) in /home2/gv3system/swaro
op.jr/Egmont/Jan23/GV3_System/GV3_Source/Subsystem/ConSS/App/ConIDS/IDS_Main.c 2
29 line
 dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]
 dwc_set_USBTrdTim : Bus Clock [120000000], TrdTim[2]

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: bregnev от Апрель 04, 2013, 04:50:54 pm

ситуация теперь такая - включается и висит в ошибке(

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: Aleksey Mo-skin от Апрель 04, 2013, 05:01:09 pm

ориг 18 http://yadi.sk/d/xJ4Kpeja3iox6

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: Aleksey Mo-skin от Апрель 04, 2013, 05:03:10 pm

Это не ошибка, все норм, так и должно быть, а висит т.к. крум не совпадает.

Название: Re: samsung SCX 3400. Трабл с прошивкой (в 10NU)
Отправлено: bregnev от Апрель 04, 2013, 05:04:32 pm

Все тему можно закрывать. Всем спасибо. залил оригинал 10 потом сверху фикс - все заработало.