Fix-free forum | Прошивки принтеров и МФУ
Общение => Мне нужна прошивка => Тема начата: n.granata от Февраль 22, 2013, 11:00:06 pm
-
Hi, i need firmware for:
Samsung ML-2165W
SERIAL: Z7D3B8GCCD01ENJ
CRUM: 12121117579
FW Version: V3.00.01.13 NOV-22-2012
I have a problem. After upgrading the firmware in the folder FGO 4.3 (I have not run generation CRUM), the toner is not recognized. All the LEDs are red. Do you think that with this firmware will solve the problem? Thank you.
Sorry I do not speak Russian.
I hope I was clear.
Thank you very much.
У меня есть проблема. После обновления прошивки в папку fG0 4,3 (я не запускать поколения CRUM), тонер не распознается. Все светодиоды красного. Вы думаете, что с этой прошивкой будет решить эту проблему? Спасибо.
Извините, что я не говорю на русском. Я надеюсь, что было ясно. Большое спасибо.
-
Try it http://gfile.ru/amxn
If this fix firmware do nor resolve your problem, it is very bad.
-
Many thanks, but I have not solved the problem. the printer is visible in USB and WIFI, but it gives error toner. is there a way to reset the printer? Thank you.
I used the samsung software to upgrade. there is another software?
Большое спасибо, но я еще не решил проблему.Принтер виден в USB и WiFi, но он дает ошибку тонера. есть ли способ сбросить принтер? Спасибо.
Я использовал программное обеспечение Samsung для обновления. есть другая программа?
Toner is ORIGINAL (bundled with printer)
ERROR:
The machine has detected either a missing or incompatible Black Toner. User intervention is required to ensure that a compatible type of Black Toner has been properly inserted into The machine. Printing is not available.
-
You need Debug-cable http://blog.fix-free.info/?page_id=408
-
I bought this. should arrive in a week.
Я купил это. должны прибыть в неделю.
-
I continue the discussion on "I don't speak english" section :)
thanks!