Fix-free forum | Прошивки принтеров и МФУ
Общение => Мне нужна прошивка => Тема начата: askt от Апрель 22, 2020, 12:09:12 am
-
I want to get this file
Model Name: CLP-360 Series
Machine Serial Number: Z8A0B8GD3A0059X
Firmware: v3.00.01.14
CRUM Black: 13031615593
Thanks
-
http://fixgen.pro/getfile.php?hash=fc5a46510c817d45e0266d653ceffd98 (http://fixgen.pro/getfile.php?hash=fc5a46510c817d45e0266d653ceffd98)
-
Thanks for program.
But I have a problem, could you help me?
before performing the program 4 lights of cartrige were turned on, also after performing the program those 4 lights are turned on. what do I do about this problem?
Also at the time of controlling of cartriges, motor's printer dose not start, only the light of hiter turned on and off for 2 seconds.
-
did you try to flash other firmware file before?
-
no
-
13031615593 or 130316I5593 ?
-
13031615593 is correct
-
I think my printer is lock because it checks only cartridge and motor doesn't start .
Could you help me unlock it?
-
Flash original FW v1.14
-
could you send file for flash?
-
https://www.dropbox.com/s/4jvfx3exnq29tk2/CLP360_V3.00.01.14_printservis.com.ua.hd (https://www.dropbox.com/s/4jvfx3exnq29tk2/CLP360_V3.00.01.14_printservis.com.ua.hd)
-
Thanks
-
I used flash original then printer worked and showed black cartridge had 5% and LED of black cortridge started to blink. When I order "Supplies Information" printer performs configuration order and followed by half of the paper stucks in printer.
By performing FIX_13031615593_CLP-360_V3.00.01.14 program that you send for me printer is locked like befor.
There may be a problem with Fix program. Please review and send me again.
-
Fix program 100% work only with original samsung chip. Not uset reset FW before.
You can try another reset program from: http://print-time.net/en/firmware/index/samsung/clp-365/136/343 (http://print-time.net/en/firmware/index/samsung/clp-365/136/343)