Добрый день. В процессе прошивки 4727FD завис, пришлось выключить аппарат. После включения в готовность не выходит. Подключился ч/з дебаг, ответ от принтера есть но в режим vxshell> войти не могу.
Loading boot application...
[NG0x00009777]
Boot : Batian(C3N) V
<MXIC MX25L128>
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x02800000)...
Decompressing Kernel to RAM
src_addr = 0x0280000C, dest_addr = 0x00100000, ul_size = 0x006BFC00
Decompress ....................................................................
.......................
[Zlib] err = -3
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
<MXIC MX25L128>
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x03000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
-------------------------
....Done.
Loading boot application...
[NG0x00009777]
Boot : Batian(C3N) V0.37 06-21-2011
<MXIC MX25L128>
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
Kernel Data Read End
Compressed Kernel was found (0x02800000)...
Decompressing Kernel to RAM
src_addr = 0x0280000C, dest_addr = 0x00100000, ul_size = 0x006BFC00
Decompress ....................................................................
.......................
[Zlib] err = -3
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
<MXIC MX25L128>
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x03000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
-------------------------
....Done.
Loading boot application...
[NG0x00009777]
Boot : Batian(C3N) V0.37 06-21-2011
<MXIC MX25L128>
Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry
----------------------------------------------------------------
START-UP MODE : Monitor Program
[Type 'help' to see command info.]
Version : Batian(C3N) V0.37 06-21-2011
----------------------------------------------------------------
Do you want to download from external port?[N] : n
No
vxshell> fl
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
<MXIC MX25L128>
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x03000000)
-------------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
-------------------------
....Done.<HS><HS><HS><HS>
Image includes PJL(0000001B) -> Waste 92 bytes
[[11534576 Bytes received]] - Complete Downloading
Verify Image : 0x03000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
Model : 0x05000057
Flash Type : 0x00170002
Image Type : 0x00000000
Flash Slave: 0x00000000
temp_buf : $KER
SIG : $IMG
FlashCheckSum
check sum start address : 0300001C, count : 00700000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Boot image!
Found new kernel(0x0304001C)!!!!
Decompress ....................................................................
................................................................................
................................................................................
................................................................................
............ Done
Version : 19
Decompress ....................................................................
.......................
Check ROM Image... Image decompression failed...
Encryption Kernel check Error
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again