народ кто может сделать лог от дебага 3200 при загрузке прошивки меньшей версии
Вот лог при попытке откатить 9ю на 8ю:
pROBE+> fl
Upgrade Flash ROM Image
[SFLASH_InitFLASH][NG]
FlashCheckSum
{
check sum start address : 40060000, count : 00014FFE
check sum : 0000A5A5
} /* Checksum End
==> Now program restarted on the RAM to program flash ROM(0x40060000)
jump to 0x40060000
Flash Data Download Address : 0x40100000
===============================
Start flash_writer
===============================
[SFLASH_InitFLASH][NG]
verify_Image : 0x40100000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG :
Can not find sig
----------- Display Dcache Status ------------
Control register = 0x000510F8
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x40100000)
-------------------------
Samsung OTG, 2006
Link ID : [00000000]
-------------------------
Drv "design ware core" USB download<HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 92 bytes
[[4194424 Bytes received]] - Complete Downloading
} /* Download End */
verify_Image : 0x40100000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000
model : 0x05000041
flash type : 0x00020002
image type : 0x00000000
temp_buf : $KER
SIG : $KER
FlashCheckSum
{
check sum start address : 4010001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
This is not a valid image.!!!! -17
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
а вот лог при попытке откатить с 9й на 7ю
pROBE+> fl
Upgrade Flash ROM Image
[SFLASH_InitFLASH][NG]
FlashCheckSum
{
check sum start address : 40060000, count : 00014FFE
check sum : 0000A5A5
} /* Checksum End
==> Now program restarted on the RAM to program flash ROM(0x40060000)
jump to 0x40060000
Flash Data Download Address : 0x40100000
===============================
Start flash_writer
===============================
[SFLASH_InitFLASH][NG]
verify_Image : 0x40100000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG :
Can not find sig
----------- Display Dcache Status ------------
Control register = 0x000510F8
Icahe : ON
Dcahe : OFF
MMU : OFF
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x40100000)
-------------------------
Samsung OTG, 2006
Link ID : [00000000]
-------------------------
Drv "design ware core" USB download<HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 92 bytes
[[4194424 Bytes received]] - Complete Downloading
} /* Download End */
verify_Image : 0x40100000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000
model : 0x05000041
flash type : 0x00020002
image type : 0x00000000
temp_buf : $KER
SIG : $KER
FlashCheckSum
{
check sum start address : 4010001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Not found new kernel!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
Генератор прошивок для SCX-3200/05/07 версии v3.00.01.13 CRUM
http://rghost.ru/41356356 пароль: fix-free.ru
does not work see pictures
[/b]
unpacking and running it get this error
http://farm9.staticflickr.com/8063/8183031646_377262b719_z.jpg (http://farm9.staticflickr.com/8063/8183031646_377262b719_z.jpg)
[вложение удалено администратором]