Fix-free forum | Прошивки принтеров и МФУ

Общение => Ремонт оргтехники => Тема начата: netpolicer от Ноябрь 20, 2013, 12:00:23 am

Название: Samsung ML-2580N Problem Help Me :(
Отправлено: netpolicer от Ноябрь 20, 2013, 12:00:23 am

hello

fix the installation program did

machinery remained green LED

There are no actions

dump file is available?

thank you for everything

Название: Re: Samsung ML-2580N Problem Help Me :(
Отправлено: netpolicer от Ноябрь 24, 2013, 12:55:45 am

New kernel was not found

debug cable :(

Название: Re: Samsung ML-2580N Problem Help Me :(
Отправлено: netpolicer от Ноябрь 24, 2013, 01:10:34 am

[ POWER ON  Booting... ]


Pressed key...
Upgrade Flash ROM Image
==> Now program restarted on the RAM to program flash ROM(0x40020000)
jump to 0x40020000
Flash Data Download Address : 0x42000000

===============================
    Start flash_writer         
===============================
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
model : 0x00000000
flash type : 0x00000000
image type : 0x00000000
temp_buf :
SIG : $IMG
Can not find sig
----------- Display Dcache Status ------------
    Control register       = 0x000510F8
    Icahe : ON
    Dcahe : OFF
    MMU   : OFF

Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x42000000)
-------------------------
Samsung OTG, 2006
Link ID   : [4F54240A]
-------------------------
Drv "design ware core" USB download<HS><HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 48 bytes
[[7340104 Bytes received]] - Complete Downloading

} /* Download End */
verify_Image : 0x42000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00700000
model : 0x0300002F
flash type : 0x00010001
image type : 0x00000000
temp_buf : $IMG
SIG : $IMG

FlashCheckSum
{
check sum start address : 42000018, count : 00700000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
ul_rom_size[0x42700018]
Found new kernel(0x424F0018)!!!!
ZIP Dest : 0x40D80000
[ POWER ON  Booting... ]

Press any key to execute Monitor Program within 1 sec...
New kernel was not found...