подскажите принтер с таким же фиксом заблокировался. через дебаг команда n не отвечает. вот что пишет вообше
Boot&Mon. CheckSum OK!
[ POWER ON Booting... ]
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
New kernel was found...
CHKSUM
{
check sum start address : 42F00000, count : 00440000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Kernel Data Read End
Find Compressed Kernel
Kernel UnZip Done!!
jump to 0x40080000
ramsize= 40FFFFFF, gsbsize = 40CF9A54, FreeMemPtr = 40CF8D98, FreeMemStart = 40
CF8D98
<<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
Model Code : ML1865W
Main Kernel F/W Version : V3.00.01.06
Main Kernel F/W Date : APR-26-2011
DRAM:>
Check PowerOn Mode PBA Port ---- ( GPIOCtrl - 0x31ec0 GPIO1Dir - 0xfffff13f GPI
O1In - 0x7f7240 )
################### Normal Mode Start##########################
<<<HAL_InitWDT>>> WatchDog Enabled !!!
=====Initializing MAC Driver =====
======NICCON Init Finish!!=========
======WSD Init Finish!!=========